Strength factory XPE foam single-sided adhesive coating EPDM foam sealing strip CR foam back adhesive pad

Main characteristics: 1. It has sealing performance, avoiding gas release and atomization. 2. Compressive deformation resistance, which means that elasticity has durability and can provide long-term shock protection for accessories. 3. It has flame retardancy, does not contain harmful and toxic substances, does not remain, does not pollute equipment, and is not corrosive to metals. 4. It can be used in various temperature ranges. It can be used from minus 40 degrees Celsius to 90 degrees Celsius. 5. The surface has wettability, easy adhesion, easy fabrication, and easy punching. 6. The engineering polyurethane formula provides a wide modulus range -2-90 psi @ 25% deviation - to meet more design flexibility requirements. (1) Panel interlayer: Its function is to prevent loosening, impact noise, and adhesion. (2) Around the LED: to prevent light leakage, absorb impact, and ensure high air tightness. (3) PCB lower periphery: absorbs shock, absorbs vibration, fills gaps, and provides insulation effect. (4) Keyboard gasket: has good resilience and dimensional stability. (5) Absorb impact sound around the battery and improve air tightness. (6) Foot pad: Good friction, good dimensional stability (7) Rear cover of magnetic disc drive: Absorbs vibration, prevents impact noise, improves air tightness (8) Friction pad: Good friction, good dimensional stability. (9) Disk cover cushion: absorbs vibration, blocks motor noise, prevents vibration, improves air tightness (10) around the speaker: prevents noise and fills gaps.
The main colors are white, black, and gray, with commonly used thicknesses of 0.3mm, 0.5mm, 0.8mm, 1.0mm, 1.5mm, 2.0mm, and 3.0mm. The foam foam foam has a foaming ratio of 5 times, 8 times, 10 times, 15 times, 20 times, and 30 times. The release mainly consists of release paper (white, yellow) and release film (red, green, blue, orange). Usage: Suitable for frame decorative strips, furniture decorative strips, car decorative strips, wave boards, wheel arcs, flow blocking, brake lights, car logos, etc The adhesion and fixation function of motorcycle signs, electrical nameplates, wool strips, etc. is characterized by strong adhesion, good retention, UV resistance, temperature resistance, water resistance, solubility resistance, and plasticity resistance. Applicable temperature: -20 ℃~120 ℃. Nantong XPE foam single-sided adhesive coating EPDM foam sealing strip CR foam back adhesive pad
Composition: Release paper adhesive CR material
One:EPDM (ethylene propylene diene monomer) rubber foam sponge:
（1） EPDM-20-25 type:
(1) Product specifications: length 2000mm x width 1000mm x thickness 0.5-50mm.
(2) Density=135-165 kilograms/cubic meter, hardness 20-25 degrees, color: black.
(3) Product features: high hardness, high resilience, environmentally friendly, halogen-free, aging resistant, high and low temperature resistant, generally suitable for temperatures ranging from -45 ℃ to 180 ℃.
（2） EPDM (ethylene propylene diene monomer) rubber foam sponge: EPDM-15-20 type:
(1) Product specifications: length 2000mm x width 1000mm x thickness 0.5-50mm.
(2) Density=115-150 kilograms/cubic meter, hardness: 15-20 degrees, color: black.
(3)Product features:Moderate hardness, good resilience, environmentally friendly, halogen-free, aging resistant, high and low temperature resistant, generally suitable for temperatures ranging from -45 ℃ to 180 ℃.








Second:CR (chloroprene rubber) rubber foam sponge:
(1)CR-30-40 type
(1) Product specifications: length 2000mm x width 1000mm x thickness 0.5-50mm.
(2) Density=155-195 kilograms/cubic meter, hardness 30-40 degrees, color: black.
(3) Product features: oil resistance, high hardness, high elasticity, aging resistance, high and low temperature resistance, generally suitable for temperatures ranging from -40 ℃ to 110 ℃.
(II)）: CR-20-25 type
(1) Product specifications: length 2000mm x width 1000mm x thickness 0.5-50mm.
(2) Density=125-165 kilograms/cubic meter, hardness 20-25 degrees, color: black.
(3) Product features: oil resistance, good elasticity, aging resistance, high and low temperature resistance, generally suitable for temperatures ranging from -40 ℃ to 110 ℃
（3） :Simulated CR (synthetic chloroprene rubber) synthetic rubber foam sponge: FCZ-15-20 type
(1) Product specifications: length 2000-2400mm x width 1000-1200mm x thickness 0.5-50mm.
(2) Density=135-165 kilograms/cubic meter, hardness 15-20 degrees, color: black.
(3) Product features: Flame retardant, oil resistant, aging resistant, high and low temperature resistant, generally suitable for temperatures ranging from -40 ℃ to 110 ℃

3： NBR (nitrile rubber) rubber foam sponge: NBR-16 type
（1） ProductionProduct specifications: 2400mm long x 1200mm wide x 0.5-50mm thick.
(II)density=100-120 kilograms/cubic meter, hardness 16 degrees, color: natural yellow.
(III)Product FeaturesHigh flame retardancy, oil resistance, aging resistance, high and low temperature resistance, generally suitable for temperatures ranging from -40 ℃ to 110 ℃

Nantong XPE foam single-sided adhesive coating EPDM foam sealing strip CR foam back adhesive pad
Our foam products have good thermal insulation and insulation properties; Low permeability; Cushioning and shock resistance; Small bulk density; Sound absorption and soundproofing; Superior temperature resistance; Superior weather resistance; Superior oil resistance, solvent resistance, and drug resistance. To meet the requirements of special environments, we can also provide customers with foam with special functions such as flame retardancy, conductivity, and anti-static,Rubber foam splitting processing, bonding and composite processing, as well as various shoe materials, bag materials, luggage materials, bonding processing, embossing processing, punching processing, adhesive processing, punching machine cutting processingApplied to automobiles, ships, trains, subways, air conditioners, electronics, sound systems, buildings, bridges, machinery, tourism and daily necessities, etc
M3 Hardness: 20 ± 5 Size: 32mm * 1M * 1.5M EPDM sponge foam board, is a material. It is one of the general-purpose rubbers, belonging to low unsaturated, non-polar rubber. It is a random copolymer composed of propylene and a small amount of a third monomer, forming a ternary copolymer (EPDM). In synthetic rubber, the dosage ranks third. EPDM rubber, known as non cracking rubber, has excellent ozone resistance, heat resistance, aging resistance, weather resistance, as well as water resistance and electrical insulation. PVC Double sided tape (oil adhesive, black oil adhesive, water adhesive, hot melt adhesive, yellow tape, embroidery adhesive, Velcro, flocked non-woven adhesive, Meiwen paper tape, 3M, TESA, NITTO, SONY, etc.), protective film (PE protective film, PET protective film, PVC protective film die-cutting processing...), sponge (fire resistant, flame retardant, ordinary, attractive sound insulation, filter screen sponge, etc.) Processing and molding of rubber and plastic foam rubber board (environmentally friendly rubber, black pure rubber, grid rubber, green rubber board, oil resistant rubber board, etc.). We can provide customers with various types and sizes of boards, sheets, and rolls.
Usage 1: Sealing of civil and wall joints, filling of road and bridge joints 2: Leak proof materials for buildings, skylights, bathtubs 3: Vehicles, ships Light barriers, door mirrors, taillights, air conditioning components 4: Seals for household appliances, refrigerators, cooling devices, air conditioning, and vending machines