Overview
| brand | Shenlong Valley | material quality | Zinc magnesium aluminum or hot-dip zinc (hot-dip galvanizing) |
| surface treatment | Zinc aluminum magnesium or hot-dip zinc | Nominal diameter | 41/52/62 |
| length | six thousand | Applicable scope | Photovoltaic bracket power generation |
| producing area | Hengshui, Hebei | colour | silvery |
| Functional purpose | Photovoltaic bracket | Packaging specifications | tray |
| model | 41 * 41, 41 * 52, 41 * 62 | Customized or not | yes |
| Order number | fifteen billion one hundred and thirty-one million eight hundred and eighty thousand and eighty-two | category | Contact 13833825773 |
| production cycle | 5 days | Shipper | Hebei |
| Is it customizable | yes | yield strength | Q345 |
| Protection level | High strength | ||
Product Details
The global energy has promoted the rapid development of the new energy industry, and solar energy is an important basic energy among various renewable energy sources; Therefore, as a solar power generation technology that converts solar energy into electricity, the photovoltaic industry is developing rapidly.
At present, there are more and more restricted conditions for the use of solar photovoltaic brackets. The main reason is that the quality of steel is uneven, and installation requires a large amount of on-site drilling. However, the steel after drilling is prone to corrosion, so new brackets are needed to replace these angle steel brackets in order to slow down corrosion and extend service life.
Hebei photovoltaic bracket manufacturer, a new type of solar bracket main structure, with a special-shaped cold-formed thin-walled steel bracket structural system. Specially shaped cold-formed thin-walled steel is a prefabricated lightweight steel structural system that is mass-produced, rapidly assembled, and fully operational. It has the characteristics of low steel consumption, time-saving construction, and labor-saving.
The steel structure support of the special-shaped cold-formed thin-walled steel structure system is formed by connecting the prefabricated cold-formed thin-walled steel in the factory with bolts at the construction site to form a structural framework, and then installing battery panels to form an overall photovoltaic array.
Factory prefabricated integrated steel support system. Photovoltaic support manufacturers prefabricate steel structural frames with purlins. At the construction site, only the support modules need to be assembled and fixed on site, and then the battery panels are installed to form the entire photovoltaic array. The construction speed is fast, and it is suitable for large-scale power plants. The installation requirements for this type of steel structure bracket are high, and generally the steel used is of good quality and has a good surface treatment process.
The inclination angle of solar photovoltaic brackets is generally determined by the solar irradiation angle and local latitude. 36 °~45 ° photovoltaic brackets can be selected in the south of the Yangtze River, and 45 °~51 ° brackets can be selected in the north of the Yangtze River. Only after installing photovoltaic brackets can a better solar irradiation angle be achieved and a higher heat collection effect be achieved.
There are currently two types of tilt angles for solar photovoltaic brackets on the market, namely 38 ° and 45 °. So it is necessary to adjust the angle of the solar photovoltaic bracket according to the different usage, so as to better utilize solar energy and make it benefit us!
Shenlong Bayer takes the research and development, production, sales, construction, and after-sales service of photovoltaic support systems as its responsibility, and successfully applies its fixed ground support system, fixed roof support system, single axis follow-up system, and dual axis follow-up system in the field of photovoltaic support system integration.
Photovoltaic bracket is a bracket designed for placing, installing, and fixing solar panels in a photovoltaic power generation system. The angle, orientation, and arrangement of the bracket installation affect the power output of the entire photovoltaic power generation system.
The Shenlong Bayer high-strength photovoltaic bracket has multiple classification methods, which can be divided into welded and assembled types according to the connection method; According to the installation structure, it is divided into fixed type and daily type; According to the installation location, it can be divided into ground type and roof type. Regardless of the type of photovoltaic system, its bracket structure is generally similar, including connectors, columns, keels, beams, components, and other parts.
Ground photovoltaic system bracket
The Shenlong Bayer high-strength ground photovoltaic system refers to a photovoltaic system installed on outdoor open ground, usually in the form of concrete block foundation, and can also be directly buried, anchored, and other methods. (The foundation situation requires consultation with soil mechanics designers)
Distributed photovoltaic power generation system, also known as distributed power generation or distributed energy supply, refers to the configuration of smaller photovoltaic power generation and supply systems on or near the user site to meet the needs of specific users, support the economic operation of existing distribution networks, or meet both requirements. The basic equipment of distributed photovoltaic power generation system includes photovoltaic cell modules, photovoltaic array brackets, DC combiner boxes Equipment such as DC distribution cabinets, grid connected inverters, AC distribution cabinets, as well as power supply system devices and environmental monitoring devices. Its operating mode is that under the condition of the sun, the solar cell module array of the photovoltaic power generation system converts the solar energy into output electricity, which is concentrated in the DC distribution cabinet through the DC combiner box. The grid connected inverter inverts the current to supply the building's own load, and excess or insufficient electricity is adjusted by connecting to the grid.
The distributed roof photovoltaic support system is composed of aluminum alloy guide rails, color steel tile fixtures, stainless steel hooks, L-angle aluminum, medium pressure blocks, edge pressure blocks, stainless steel screws, and other components. Shenlong Bayer Technology Hengshui Co., Ltd. is a manufacturer specializing in providing distributed photovoltaic support and photovoltaic support accessories for distributed photovoltaic power generation projects. The product series includes color steel tile roof photovoltaic support, glass tile roof photovoltaic support Oil felt tile roof photovoltaic brackets, cement flat roof photovoltaic brackets, etc. According to customer requirements, Dragon Bayer Company can customize various bracket solutions for you. The industry standard NB/T10642-2021 "Technical Requirements for Photovoltaic Power Station Supports" was drafted with the participation of our company. This standard promotes the healthy and rapid development of photovoltaic power stations, is more standardized, and has evidence to rely on during the implementation process.
Our service tenet is to provide customers with cost-effective support system engineering solutions. With a strong R&D team, good production and operation philosophy, user-friendly management, and a team, we have grown into a world-class supplier of solar support systems.
