Waterproof adhesive UV3312 (H) glass plastic, steel sealing transparent adhesive
Waterproof adhesive UV3312 (H) glass plastic, steel sealing transparent adhesive
Waterproof adhesive UV3312 (H) glass plastic, steel sealing transparent adhesive
Waterproof adhesive UV3312 (H) glass plastic, steel sealing transparent adhesive

Waterproof adhesive UV3312 (H) glass plastic, steel sealing transparent adhesive

$1.89
Place of Origin
China
Shipping
Air Freight, Ocean Freight, Land Freight

Product Description

Overview

brand
Gao Bu
name
UV3312 (H)
exterior
Transparent liquid
Chemical composition of base material
Modified polyurethane resin
viscosity
100 (Pa · s)
Curing depth( mm@30s )
one point two
Hardness (Shore D)
eighty-two
Working temperature (℃)
-40-140
Dielectric constant (1MHz)
four point one
Dielectric loss (1MHz)
zero point zero three
Dielectric strength (KV/mm)
twenty
Surface resistivity (Ω)
five point nine × 10 ^ 15
Volume resistivity (Ω. cm)
eight × 10 ^ 15
Tensile strength (MPa, PC/PVC)
six
Water absorption rate (%, 24h@25C )
zero point zero two

Product Details

Waterproof adhesive UV3312 (H) glass plastic, steel sealing transparent adhesive

Product Introduction
UV3312 (H) is a single component, high viscosity adhesive that quickly cures to form a tough adhesive layer when exposed to sufficient ultraviolet/visible light. This product exhibits good adhesive and waterproof properties for most substrates, especially suitable for glass, plastic, and steel. It has the advantages of fast gluing speed, high adhesive strength of the adhesive strip, and no wire drawing. UV3312 (H) has passed ROSH&HF testing.
Typical use

This product is mainly used for the bonding of various plastic and glass materials. It is repairable and can be used for waterproofing and reinforcement of circuits.

matters needing attention
This product is not suitable for sealing strong oxidizing substances as it is sensitive to ultraviolet radiation. Avoid light during storage and use. The curing speed depends on the intensity of the UV lamp, the distance between the light source and the adhesive layer, the required curing depth or adhesive layer gap, and the transmittance of the substrate. The adhesive coating area must be oiled and cleaned thoroughly.
It is necessary to irradiate with a UV lamp with a wavelength of 365 nm to confirm that the UV light can penetrate the bonding area.
The curing rate depends on the intensity of ultraviolet radiation, the distance between the light source and the adhesive layer, and the required curing depth.
After use, the lid must be immediately closed. Black rubber hoses must be used for gluing. After use, the lid must be immediately closed.
Packaging specifications
Order code: 10mL/piece, 30mL/piece
Storage conditions
Unless otherwise specified, the ideal storage condition for this product is to store it in a cool and dry place within the temperature range of 8~28 ℃ in its original packaging. The storage temperature is 8-18 ℃. To avoid contamination of unused liquids, do not pour any glue back into the original packaging. For more specific storage life information, please contact our technical service center.


Waterproof adhesive UV3312 (H) glass plastic, steel sealing transparent adhesive

Waterproof adhesive UV3312 (H) glass plastic, steel sealing transparent adhesive

Waterproof adhesive UV3312 (H) glass plastic, steel sealing transparent adhesive



Waterproof adhesive UV3312 (H) glass plastic, steel sealing transparent adhesive


The office address of Suzhou Gaobu Electronic Technology Co., Ltd. is located in Chinese garden City, Paradise on Earth, Suzhou, Room 205, No. 515, Ganjiang West Road, Suzhou. It was registered in the Market Supervision Administration Bureau of Gusu District, Suzhou, List of National Famous Historical and Cultural Cities in China Conservation Area on August 3, 2015, with a registered capital of 1 million yuan. In the six years of development and growth of the company, we have always provided good products and technical support Our company mainly engages in research and development, sales of electronic products and accessories, electronic components, automation equipment, and electromechanical equipment through sound after-sales service; Sales: Chemical raw materials and products (excluding dangerous goods), electric tools and accessories, instruments and instruments; Self operated and agent import and export business of various goods and technologies (excluding goods and technologies that are restricted or prohibited from export by the state). Projects that require approval according to law can only be operated with the approval of relevant departments., We have excellent products and a professional sales and technical team. Our company belongs to the Suzhou Electronic Processing Company industry. If you are interested in our product services, we look forward to your online message or call for consultation.


Waterproof adhesive UV3312 (H) glass plastic, steel sealing transparent adhesive


Trading Area

Global

Quotation

Name
Company
Phone
Email Address
Requirements
Quotation
Jiangsu, China
Chat
Manufacturer
Messages