Overview
| brand | AUTEC | Does it support processing customization | |
| Imported or not | Measurement object | ||
| measuring range | 0-1m (wireless signal penetration problem, choose other sensors in situations with deep water accumulation) | measurement accuracy | |
| size | 206 * 135 | source | |
| resolving power | working temperature | ||
| power | specifications | ||
| type | Continuous working hours | ||
| Flow range | Applicable scope | ||
| weight | Processing customization | no | |
| model | AOW | producing area | Chinese Mainland |
| province | Fujian Province | Prefecture and city | Fuzhou |
| operational principle | ultrasonic | classification | NB IoT+integrated built-in antenna 4G+ |
| Ranging distance | 1m | Article number | AOW001 |
| Decoration and construction content | Buried | Built in lithium battery | yes |
| 4G, NB IOT | yes | Integrated built-in antenna | yes |
| protect | IP6 8 protection | Is it in stock | yes |
Product Details
Remote measurement terminal for road water accumulation
With the continuous improvement of urban management level, the ability to obtain various measurement data has also improved synchronously. In the urban road waterlogging monitoring system, real-time monitoring of waterlogging levels in various low-lying sections of the urban area and automatic warning can be achieved. So that the municipal management department can use this system to comprehensively grasp the waterlogging situation of the entire urban area and timely carry out drainage scheduling. The traffic management department can obtain real-time water levels of each road section through this system, and provide travel guidance to the general public through media such as radio and television, to avoid significant losses caused by personnel and vehicles accidentally entering deep water sections.
This device adopts a concealed underground installation method, which meets the current urban landscape requirements. The dual mode (ultrasonic and conductivity) working mode can effectively solve the battery life problem of the product, utilizing internal intelligent algorithms to automatically switch measurement modes, effectively reducing product power consumption.
Product size (host): 90-180mm
Range: 1 meter water depth
Blind spot: better than 40mm
Blind spot resolution: 20mm
Blind spot resolution outside: 1mm
Internal battery: non rechargeable, 3.6VDC, 1900mAh × two
Battery replacement: Supported (standard lithium sub battery)
Wireless: NB IoT (China Telecom) or 4G (All Network Communication)
Protection: IP68
Shell: 304
Range: NB-IOT version takes 60 minutes, 1 test and 1 launch for 24 months, 4G version takes 5 minutes, 1 test and 1 launch for 15 months (wireless signal stability)
Measurement upload cycle: 60 minutes (factory setting, process setting possible)
Intelligent amplitude measurement: support
The wireless signal with built-in antenna can penetrate a water depth of about 1 meter for transmission, which meets practical needs at most measurement points. Of course, in the measurement of particularly deep waterlogging points, other measurement methods mentioned below should be used to assist.
In addition to the methods for collecting water accumulation data using the aforementioned equipment, there are also measurement methods such as radar, air ultrasonic, and static pressure.
In situations where the signal is weak and the measurement depth is large, the antenna can choose a non built-in version, which can ensure stable uploading of the measurement signal to the cloud platform.
