TR mobile lubricating oil vacuum filter - especially suitable for filtering oil with high viscosity,

ZJC demulsification and dehydration oil filter

Purpose:

This series of oil filters are used to treat unqualified turbine oil, suitable for online treatment of turbine oil in industries such as power, chemical, papermaking, and metallurgy. They ensure the normal operation of the unit adjustment and wetting system. The aggregation and separation technology used can also be used for low viscosity hydraulic oil and cooling oil, as well as other low viscosity lubricating oils that require the removal of a large amount of water and achieve filtration of impurities.

Product characteristics:

1. This product uses polymer magnetic materials and does not use any additives for demulsification

2. This machine adopts the ternary one time dehydration method and international enhanced hydrophilicity and flowing water principles, achieving efficient dehydration. In addition to removing liquid water, it can also remove free water and 85% dissolved water

3. The filtration system adopts a combination of dual mesh filtration and polymer adsorption material technology, which has a large pollutant capacity and can process oil up to 4000T or more

4. Adopting a trapezoidal spiral automatic backwash system, it can not only achieve ≥ 1000, but also achieve a cleanliness level of ≤ 6 (NAS1638)

5. The heating system adopts a standardized pipeline design to ensure no dead oil zones

6. Medium condensation device used

7. Electrical system, user-friendly design, maintenance free, infrared liquid level control system, fully automatic control

8. It can achieve unmanned online operation with equipment such as steam turbines and water turbines, with low noise and meeting the world's high standard environmental protection requirements

Advantages:

1. This series of products has multiple technologies, integrating vacuum drying, separation engineering technology, coagulation technology, and secret filtration technology for adsorption

2. It can automatically drain without stopping the machine, so that the waste oil meets the standard for using new oil

Selectable modes:

1. According to different mobile methods, you can choose between regular mobile and car mounted.

2. According to different environmental requirements, ordinary type, fully enclosed type, and explosion-proof type can be selected.

3. You can choose any device color according to user preferences.

Technical parameter table:

Equipment image display:

Technical advantages (reasons for choosing our company):

A. Technical advantages:

Our company has many engineers. We have introduced the separation technology of Kato, German Songge, Kaidun, and Macphail from Switzerland. At the same time, we have joined hands with Dr. Liu Ying from the Separation Engineering Research Institute of Chongqing University. We have strong scientific and technological development strength. We have a long history and accumulated rich experience in the research of oil filtering technology, the development, manufacturing, and application of oil filters. Short oil processing time.

Advantages in configuration:

1. Strong magnetic filter:

Developed independently by Tongrui Company. Composed of strong magnetic properties and stainless steel wire mesh. It can remove metal particles (even fine metal particles) and other large non-metallic impurities from the oil. It is beneficial for protecting the equipment from metal impurities. This system only needs to be cleaned and does not require replacement.

2. The entire machine consists of a four stage filtration system. Except for the latter stage fine filter element, which can be used for 0.5 to 2 years according to the degree of oil pollution, the remaining three stage filter elements are all washable, requiring only cleaning and replacement, greatly reducing the operating cost of the equipment. At the same time, the filter element is installed in an inverted shape, making disassembly simple and convenient.

3. Strong wind condensation system:

The strong wind condensation system of Tongrui Company is conducive to the rapid cooling of condensable gases such as water vapor after the oil passes through the vacuum three-dimensional flash evaporation system into a liquid state, which is discharged through the drainage system and accelerates the oil processing speed.

Generally, manufacturers do not have a condensation system, and the water vapor evaporated from the vacuum flash tower directly enters the vacuum pump, causing rapid emulsification of the vacuum pump oil. At the same time, rust occurs inside the vacuum pump due to the effect of moisture, shortening the service life of the vacuum pump.

4. A vertical three-dimensional vacuum three-dimensional flash evaporation system, equipped with 3000 circular flash Bauer rings and flash tower plates, fully thinifies the oil and increases the evaporation area of oil and water.

Generally, manufacturers use a bedroom flash evaporation system for oil filters, without a flash evaporation Bauer ring, with only one layer of flash distillation tower plate.

B. Strong production capacity and funding

The annual production capacity reaches over 1000 units. The production equipment and testing methods are complete. In order to ensure the quality of the products, our company selects supporting suppliers from international and domestic brands to ensure the reliability of the entire equipment and spare parts.

C. Advantages in safety performance:

1. Electrical part: All electrical components and cables used in the control system of the entire equipment are installed in a fully enclosed electrical control cabinet, with good insulation performance and easy operation and maintenance.

2. The equipment is equipped with a pressure protection device. If the operator operates improperly or the filter element is blocked, causing an increase in pressure, the power can be disconnected by themselves to protect the normal operation of the equipment.

3. The equipment is equipped with a floating ball level control system. Used to measure the liquid level and foam of oil in dehydration and degassing cylinders. In this way, the vacuum degree in the working system of the equipment can be adjusted by adjusting the Vapor–liquid equilibrium valve to achieve the purpose of automatically adjusting the balance of oil in and out, so as to achieve the real separation of man and machine, and make the operation more safe, convenient and reliable.

4. The sealing performance of the equipment is excellent. All sealing gaskets are made of high-pressure materials, which will not damage the rubber gasket due to excessive pressure or high oil temperature (ensuring the performance of the oil), causing oil spray.

D. Advantages in production process and material selection:

1. In terms of production process: From the appearance and structure design of the product to the quality, every process is strictly controlled, striving for excellence in every process, meticulously making every component, and testing every product.

2. Supporting manufacturers (such as vacuum pumps, oil pumps, motors, electrical components, and filter materials) are all selected from foreign or domestic brands. Long quality, use, and service life.