Overview
| brand | Jiupeng | Product Name | Nano titanium oxide |
| CAS | 13463-67-7 | Product crystal form | anatase |
| Manufacturer/Place of Origin | Zhejiang | content | ninety-nine point nine |
| Implement quality standards | Enterprise standard | level | Analytical purity |
| Article number | 1-2-4 | Is it a hazardous chemical | no |
| Packaging specifications | 25kg | model | CY05 |
| Imported or not | no | ||
Product Details
Technical indicators:
project | index |
model | CY05 |
Powder appearance | White powder |
Appearance of powder dissolved in water | Transparent liquid |
Particle size | <5nm |
purity | 99.9% |
Surface properties | Hydrophilicity |
Usage:
Use distilled water, deionized water, etc. to make CY05 powder into a water solution with a solid content of 1-2%, and spray it on walls and ceilings. The atomization effect should be good, without water droplets, and the formaldehyde and odor indicators should meet the standards within 24 hours. Those with a strong odor can be sprayed twice more. (It is recommended to use a clean towel dipped in water to gently and evenly wipe the interior and exterior of the furniture twice. The first towel should be slightly wet, and the second towel should be slightly dry. The same applies to the floor, or use a clean mop to evenly mop.)
Precautions:
1. It is generally recommended to soak and wipe the interior and exterior of furniture with a high-quality towel (with a water solution concentration of 1%), and not spray on metal surfaces;
2. After spraying, start ventilation. If there is a lot of indoor furniture and the formaldehyde volatilizes quickly and has a high concentration, it is recommended to spray more times to improve the degradation rate.
3. When spraying, a paint spray gun is generally used, which has a good atomization effect. This will spray more evenly and improve efficiency.
4. Before spraying, clean the surface to be coated and cover it with unsuitable spraying materials. It is advisable to keep the spray gun 30 to 45 cm away from the coated material.
5. The natural drying time of the coating is about 15-20 minutes, and it takes 48 hours to cure. Do not vigorously scrub before fully curing
6. When used for sewage treatment, first dissolve CY05 with a small amount of pure water, and then add it to the sewage. It is recommended to take the water behind the secondary sedimentation tank and in front of the biochemical tank. The treatment effect of sewage with good transparency is more obvious, and it is more suitable for treating sewage after inorganic precipitation treatment. The dosage is about 100g of CY05 powder for one cubic meter of sewage.
Attached figure:
【 Packaging Specification 】 20 kg/barrel