Overview
| brand | Gao Bu | Article number | Gaobu 3312 |
| Packaging specifications | 30cc, 60cc, 1KG | Adhesive material type | Electronic component circuit board |
| viscosity | 260 (Pa · s) | Hot-melt adhesive type | UV |
| Executive standards | National standard | working temperature | -40-150 |
| Curing method | UV curing | Curing cycle | 3 days |
| Validity period | 6 months | Scope of use | Electronic components, PCB circuit boards |
| Featured Services | technical support | exterior | High transparency |
| Third party testing | SGS | function | Waterproof, moisture-proof, double curing, salt spray resistance, mold resistance, insulation, aging resistance |
| Is it a hazardous chemical | no | Net content | 1kg |
Product Details
The protective film formed by the three proofing paint can effectively isolate and protect the circuit from the corrosion of chemicals, moisture and other pollutants, thus improving the reliability of the circuit board, increasing its Factor of safety, and ensuring its service life.
High step circuit board transparent protective paint can form a glossy and stretchable protective film on various printed circuit boards. It can prevent erosion by weak acids, alkalis, alcohol, mold, salt spray, thermal stress, ultraviolet radiation, moisture, and insects. This product is resistant to high temperatures and will not drip when exposed to heat. It can be directly soldered onto a protective film.
Application of Gaobu Electronic Three Protection Paint:
Commercial Household Circuit Board Protection:
Three proof paint can provide protection for electronic circuits in household appliances, making them resistant to harmful substances such as water, moisture, insects, and in offices and homes. Such as: soybean milk machine, coffee machine, Induction cooking, dryer, dishwasher, air conditioner, computer, bathroom electronics, electric car, etc.
Automotive electromechanical circuit board protection:
The automotive industry requires three proofing paint to protect circuits from the hazards of several situations, such as gasoline evaporation, salt spray, brake fluid, etc. The application of electronic systems in automobiles is constantly growing rapidly, so the use of three proofing paint has become a basic requirement to ensure the long-term reliability of automotive electronic devices. For example: computer control systems, air conditioning, automotive electronics.
Aviation and navigation circuit board protection:
The automotive industry requires three proofing paint to protect circuits from the hazards of several situations, such as gasoline evaporation, salt spray, brake fluid, etc. The application of electronic systems in automobiles is constantly growing rapidly, so the use of three proofing paint has become a basic requirement to ensure the long-term reliability of automotive electronic devices. For example: computer control systems, air conditioning, automotive electronics.
Electronic Industrial Circuit Board Protection:
Three proof paint can protect electronic devices from water, moisture, external chemicals, and special usage environments, ensuring their continuous stability. Its application range is broad. For example: LED display screens, LED guardrail tubes, solar energy, instruments, power supplies, frequency converters, consumer electronics, anti-theft, fire alarm devices, etc.
Frequently asked questions:
1. What is the reason for the whitening of the transparent three proofing paint on the picture?
Reactive whitening is generally achieved with acrylic acid type three proof paint, mainly due to the following reasons: 1. The residual rosin left during soldering reacts chemically with the three proof paint. 2. Due to the easy moisture absorption of the circuit board, it reacts with the solvent in the three proof paint to whiten. Solution: Clean the circuit board, dry it, and then apply the three proof paint
2. Does the three proofing paint have an odor?
We divide odors into three levels: odorous, low odorous, and odorless, as stated in the comparison table in the introduction. After solidification, there is no odor.
3. What is the reason why the three proofing paint is not insulated?
1. The test needs to be conducted 24 hours later
2. There are issues with the testing method:
The general response to this situation is to use spray type three proof paint, which is sprayed very thinly. Some users directly use a pointed pen to measure, and also measure against the tin angle, which is not scientific. The tin angle itself is very sharp, and there is less spraying. They also need to use a pointed pen to point, and some can be touched several times, so that the paint is wiped off, how can there be insulation effect? It is recommended to use UV three proof paint for such measurements.
4. What method is used to detect whether transparent three proof paint has been applied?
Most models of Gaobu Electronics' three proof paint contain fluorescence detection function. The circuit board coated with transparent three proof paint displays blue under the ultraviolet light, and there is no change in the areas that have not been coated with the three proof paint.
5. Do diluents need to be added to the three proofing paint for use?
This is not necessarily necessary. If the concentration of the three proofing paint is too high, it needs to be added. If there are no bubbles after the three proofing paint is applied, it does not need to be added. If there is no wire drawing during spraying, it does not need to be added. Otherwise, it needs to be added.
The office address of Suzhou Gaobu Electronic Technology Co., Ltd. is located in Chinese garden City, Paradise on Earth, Suzhou, Room 205, No. 515, Ganjiang West Road, Suzhou City. On August 3, 2015, it was registered in the Market Supervision Administration of Gusu District, Suzhou, the Market Supervision Administration of List of National Famous Historical and Cultural Cities in China Conservation Area, Suzhou, with a registered capital of 1 million yuan. During the six years of development and growth of the company, we have always provided good products and technical support Our company mainly engages in research and development, sales of electronic products and accessories, electronic components, automation equipment, and electromechanical equipment through sound after-sales service; Sales: Chemical raw materials and products (excluding dangerous goods), electric tools and accessories, instruments and instruments; Self operated and agent import and export business of various goods and technologies (excluding goods and technologies that are restricted or prohibited from export by the state). Projects that require approval according to law can only be operated with the approval of relevant departments., We have excellent products and a professional sales and technical team. Our company belongs to the Suzhou Electronic Processing Company industry. If you are interested in our product services, we look forward to your online message or call for consultation.