Overview
| brand | Yutong | power | thirty-four |
| weight | two hundred | specifications | 1.5 * 1.8 * 1.6m Customizable as needed |
| type | oven | speed | 100r/min |
| purpose | Heating of molds | height | 1.56m |
| material quality | Stainless steel, cold rolled steel, galvanized sheet | water tank | |
| yield | Initial water | ||
| Terminal water | model | YT-881-3 | |
| category | Air intake | ||
| Dewatering capacity | Dehumidification capacity | ||
| Processing capacity | application area | Preheating of molds | |
| Drying capacity | Processing customization | yes | |
| Drying medium | air | Applicable materials | Multiple possibilities |
| operational principle | Electric heating | Imported or not | yes |
| Applicable scope | Type of action | ||
| temperature range | Operating pressure | ||
| Heating method | Heat transfer area | ||
| control mode | Operation mode | ||
| Evaporation capacity | structural style | ||
| Applicable machinery | Inlet air temperature | ||
| Floor area | Fluidization area | ||
| Atomization type | Overall dimensions | ||
| Water evaporation capacity | Drying tower diameter | ||
| Studio size | Water overflow prevention shutdown | ||
| Computer automatic defrosting | Wet material movement mode | ||
| Applicable temperature/humidity range | |||
Product Details
Appearance size
820 * 1140 * 1480 (depth * width * height mm) (including top circulating motor size)
Studio size
600 * 800 * 800 (depth * width * height mm)
Studio Materials
SUS high-quality brushed stainless steel
Outer wall material
High quality A3 steel plate, surface paint treatment, coating color, customer can customize.
Operating temperature range
Room temperature RT~250 ℃ can be adjusted arbitrarily
Temperature control accuracy
± 1 ℃
Temperature uniformity
± 2 ℃% (tested under no-load condition)
Temperature control method
SSR module temperature control, PID adjustment
Power supply voltage
380V (three-phase four wire), 50HZ
Heating and blowing power
The heating power is 4.8KW, and the heating pipes are installed in the air ducts on both sides of the oven; The blower power is 0.75KW * 1 unit, and the high-temperature resistant circulating blower motor is installed on the top of the box
Loop mode
Left side air outlet, right side return air, strong pressure horizontal convection circulation, and more uniform temperature inside the furnace.
Heating equipment
Adopting far-infrared sheathed stainless steel tubular heating tube
The continuous service life of the heating element can reach over 30000 hours. It has the characteristics of fast heating speed and high heating efficiency, completely independent system, and does not affect the control circuit
Sealing
Environmentally friendly foam silicone rubber strips are pressed tightly around the edges, providing excellent sealing performance.
Insulation layer
Each part is designed with a thickness of 100mm based on the temperature rise outside the furnace and energy conservation considerations. The filling material is 100K grade high-density aluminum silicate fiber, which can withstand high temperatures of 850 ℃ and has a thermal conductivity of 0.0048 Λ m/℃
Surface temperature rise of the box
According to JB5220-91 industry guarantee, a drying oven with a working temperature not exceeding 200 ℃ and a surface temperature not exceeding room temperature plus 25 ℃
Testing standards
Temperature measurement points can be placed for testing according to JJF1101-2003 Environmental Testing Equipment Temperature and Temperature Calibration Specification or the national industry standard JB/T5520-91 Technical Conditions for Drying Ovens.
Timing device
Within the range of 0-99h (m), the timer starts when the temperature in the furnace reaches the set point. When the baking time reaches the set time, the heating system automatically shuts down, and there is a timer beep alarm. According to actual needs, the working time can be set to automatically stop the electric heater and delay the stop of the circulating fan