Galileo WQP stainless steel 304 submersible sewage pump corrosion-resistant 316 sewage submersible sewage pump

Features of all stainless steel 304316 submersible sewage pump:
1. Made of overall 304 or 316 stainless steel casting, the shipment of 304 is fast, and the delivery time of 316 material is long.
2. National standard copper wire motors, if they are high-temperature resistant, use high-temperature wire motors.
3. The thickness of the entire pump casing and impeller is quite satisfactory!
4. Mechanical seals, O-rings, and cable sheaths are all made of corrosion-resistant and high-temperature resistant materials.
The pursuit of quality has always been high.
5. The export is a 6kg national standard flange, which can be equipped with elbows or flange plates, with either option.
6. Corrosion resistance can be matched with high temperature resistance.

All stainless steel 304316 submersible sewage pump product service conditions:
1. This stainless steel sewage pump belongs to submersible pump, so it needs to work in submersible water.
2. It can be used between PH3 and 12, and out of this range, other pumps should be chosen.
3. The voltage is 380V, 50HZ, and should be used within the range of plus or minus 5%.
4. Before purchasing, please provide detailed information on flow rate, head, caliber, power, etc. in order to select the correct and suitable model. Do not choose a model with a much higher head or flow rate, which is not good for the water pump.

All stainless steel 304316 submersible sewage pump Product purpose:
Large buildings such as chemical plants, electroplating plants, sewage treatment plants, seawater desalination projects, residential buildings, etc

1. Suitable for sewage treatment systems in construction projects, industrial and mining enterprises, municipal engineering, etc.
2. Sewage discharge, sewage relay, and sewage treatment in urban systems.
3. Auxiliary equipment for exploration and mining.
4. Sewage discharge from food, medical, seawater drainage, and cabin water accumulation.
5. Civil air defense system drainage station, water supply equipment factory, and water supply and drainage equipment.
6. Agricultural irrigation, rural biogas digesters, fish farming, fountains, water spraying, etc.

Related products:

Detailed Product Introduction
1、 Introduction to WQD Full Machine Cast Stainless Steel 304 Submersible Pump
The S series stainless steel sewage pump is a water conservancy machinery that operates in a coaxial system with a motor and water pump. The overall stainless steel material is corrosion-resistant, acid-base resistant, non clogging, anti winding, compact structure, small size, wear-resistant, corrosion-resistant, and small size. The overall casing of this product is made of stainless steel, with strong corrosion resistance, excellent material selection, advanced structure, wide flow passage, and strong sewage discharge capacity. Suitable for conveying wastewater containing acidic and alkaline components, such as building wastewater, chemical plant wastewater, food factories, seawater treatment, etc.
 
2、 Characteristics of WQD Type Fully Cast Stainless Steel 304 Submersible Pump
1. The overall shell is made of stainless steel SUS304 material precision casting, specifically designed to extract wastewater with slight acidity and weak alkalinity.
2. NSK bearings imported from Japan have the characteristics of high rotation, low noise, low vibration, and low wear torque, extending their service life.
3. Equipped with an overload protector, it will automatically cut off the power supply and stop the water pump when the temperature is too high due to voltage drop, impeller blockage, or water level drop below the ideal liquid level.
4. Stainless steel open impeller and shaft, wear-resistant and durable. Due to the special structure and mechanical position design of the impeller, it can throw solid particles and long fibers out of the pump chamber at high speed without jamming the impeller, with good anti clogging performance.
5. Use corrosion-resistant, acid and alkali resistant fluorine rubber O-rings, seals, and corrosion-resistant, acid and alkali resistant mechanical seals
6. Corrosion resistant, acid and alkali resistant cable
7. The national standard flange WQ (D) all stainless steel precision casting sewage submersible pump adopts a stainless steel precision casting shell, which has characteristics such as corrosion resistance, environmental protection, high head, and large flow rate.
8. The oil chamber adopts a double-sided mechanical seal made of fluororubber, while the outer chamber adopts a single-sided fluororubber mechanical oil seal structure, effectively reducing the problem of sealing water ingress caused by friction between the skeleton oil seal and the shaft.
9. The motor adopts high-temperature wire, F-class insulation, and thermal protection device, effectively extending the service life of the pump.
11. According to customer requirements, a mixing device can be equipped, which generates extremely strong mixing force with the rotation of the motor shaft, stirring the sediment in the sewage tank into suspended solids and discharging them. It can also be equipped with a cutting device, which can discharge debris such as long fibers, plastic, paper bags, and straw from the sewage.

Model parameters of WQD fully cast stainless steel 304 submersible pump

1. The whole is made of stainless steel 304 precision casting, which can extract media containing acid and alkali. (Including the internal impeller and each screw gasket, which are made of stainless steel material, the impeller is cast instead of welded, with good quality)
2. The water pump is equipped with NWQDK bearings imported from Japan, a national standard copper wire motor, a high-quality double end corrosion-resistant mechanical seal, and a high-quality fluorine rubber sealing ring
3. 220V pumps can be equipped with float switches.
4. The water pump can be connected by flange or by national standard internal thread connection

 Precautions:

Fault causes and troubleshooting methods:

Product description of QS stainless steel submersible pump:
The QS stainless steel submersible pump adopts precision casting and stainless steel barrel, which is beautiful and elegant, and has the characteristics of rust prevention, corrosion resistance, and pollution-free.
The motor is located on the upper part of the electric pump and is a single-phase or three-phase asynchronous motor mechanism. The QS stainless steel small submersible pump is located on the lower part of the motor and adopts an upper suction structure, which can prevent blockage caused by the electric pump getting stuck in the sludge. Widely used in various special requirements such as corrosion resistance and hygiene.
This pump is designed to transport media with higher hygiene requirements or mild corrosion. The overall pump is made of corrosion-resistant material and is made of stainless steel by stretching and stamping. The water pump adopts a water-cooled design, with thorough drainage, and the motor does not overheat after long-term operation.

Performance parameters of QS stainless steel submersible pump:

Note: Single-phase pumps can be equipped with a float switch to automatically control the pump's stop and start based on changes in liquid level.

Stainless steel material adaptation medium table:

Advantages of QS stainless steel submersible pump products:

1. The QS stainless steel submersible pump adopts stainless steel precision casting as a whole, which is corrosion-resistant, environmentally friendly, small in size, and durable.
2. Adopting fluorine rubber double end mechanical seal and fluorine rubber radial ^ ^ O "ring seal, effectively sealing and protecting against harsh liquids in the environment.
3. The motor adopts F-class insulation and is equipped with a thermal protection device, greatly extending the service life of the pump.
4. We can customize the configuration of anti-corrosion cables, PTFE mechanical seals, and high-temperature liquid parts according to customer special requirements.
5. The use of stainless steel closed stamping welded impeller greatly improves the head.

The main uses of QS stainless steel submersible pumps are:

Suitable for buildings, hospitals, residential communities, municipal engineering, road traffic and construction, factory water supply and drainage, aquaculture, pharmaceutical industry, beverages, seawater and saline water, and general corrosive media.

After sales service commitment

1. The product provides free maintenance for one year. During the free maintenance period, if there is any damage caused by non human factors (excluding force majeure reasons), Shanghai Cangmao Industry will promptly replace and repair it for free.

2. The product is guaranteed for lifetime repair. If the buyer entrusts Shanghai Cangmao Industry for maintenance and upkeep after the free warranty period expires, Shanghai Cangmao Industry will maintain and replace the equipment with replacement parts (at the factory price), and provide detailed maintenance content.

3. Shanghai Cangmao Industry adheres to the principle of putting customer interests first, thinking about what customers think and being urgent, and doing its best to meet customer requirements and provide good after-sales service.

Product Quality Commitment

1. Shanghai Cangmao Industry is responsible for the quality and delivery time of the products. The warranty period from the date of product delivery is one year (three months for vulnerable parts), with lifelong maintenance. Shanghai Cangmao Industry shall bear corresponding responsibilities for the consequences caused by product quality. If the consequences are caused by improper operation, Shanghai Cangmao Industry will maintain the equipment at a low cost.

2. Conduct inspections and evaluations on all sub suppliers, and purchase all products only from qualified sub suppliers. The raw materials, purchased parts, and outsourced parts provided by the sub suppliers must undergo strict review and inspection before being allowed to enter the warehouse;

3. The product manufacturing strictly implements the "double three inspections" system, and unqualified parts are not transferred, assembled, or left the factory;