3M dp8410ns acrylic resin adhesive for high-temperature resistant doors, windows, glass tiles, joint filling and bonding structural adhesive

Product Description:
Brand: 3M Scotch weld
Product name: 3M DP8410NS adhesive
Specification: 45ml/piece; 490ml/piece
Packaging: 12 pieces/box; 6 pieces/box
Glue type: 10:1 acrylic two component structural adhesive
Color: Green
Shelf life: 18 months

3M Scotch Weld DP8410NS high-performance acrylic adhesive, provided with two component acrylic adhesiveThe shear and peel properties of high-strength structural adhesive can bond various metals and plastics, and it is suitable for oily surfacesIt can be directly bonded,Rapid curing, able to achieve structural strength in an extremely short time

Characteristics: Quickly reaching structural strength, soft odor, meeting flame retardant grade requirements, especially suitable for various plasticsAdhesion between materials and metals (including oily surfaces) with strong impact resistance

Application industries: ships, automobiles, construction, signage, consumer goods, transportation, special vehicles, metal processing

General Industry, Military and Government, Electrical Appliances, MRO, Electronics, Aerospace, Composite

Suitable for bonding materials: high-performance plastics (nylon), plastics (ABS, PVC, acrylic acid), metal, glassCeramics, wood, cardboard, etc

Typical applications: Shell bonding for tablets, laptops, etc

The shelf life reaches 18 months, which is twice as long as traditional acrylic adhesives, eliminating the need for refrigeration and helping to reduceScrapping and disposal costs caused by expired inventory

Main features: High impact resistance, able to bond with most plastics

1、 Product model: DP8410NS green 45ml/piece 10:1
2、 Product features: Main features: Low odor, fast establishment of strength
3、 Product characteristics:
Operation time: 10-12 minutes
Opening Hours: 7-9 minutes
Time to reach initial strength: 26-30 minutes
Time to reach structural strength: 34-38 minutes
Complete curing time: 24 hours
Viscosity: 75000CPS
Density: 1.03g/cm2

Characteristics:
-Tough type
-Open for approximately 7-9 minutes
-Shear strength of
-The operation time is approximately 10-12 minutes
-Outstanding peel and impact strength
-Heatable curing
-10: 1 ratio mixing
-Including glass beads (0.010 "diameter) to control the thickness of the bonding layer
Note: Unless otherwise specified, all attributes are at 72 ° F (22 ° C),

Typical physical properties after mixing
Color: Green
Complete curing time: 24h @ 22C
Viscosity: 75000 cps
Density: 1.03g/cubic centimeter
Shear strength: 4100psi @ aluminum
Peel strength: 50piw @ aluminum

Storage: Store at a temperature of 27 degrees Celsius or below, refrigerate at around 4 degrees Celsius to extend the shelf life and not freeze!When reusing, it is necessary to put the glue at room temperature and use it again!
Shelf life: Unopened glue can be stored for 18 months in the recommended storage method,In order to obtain high strength structural bonds, paint, oxide film, grease, dust, demoldingIt must be thoroughly cleaned, and it is recommended to use the following cleaning methods for common surfaces:

Steel:
1. Wipe dust and dirt from pure solvents such as acetone or isopropanol,
2. Use clean fine sand abrasive for sandblasting or shot blasting,
3. Clean the solvent again and wipe off loose particles,
4. When using primer, it is suitable for surface pretreatment within 4 hours
Aluminum:
1. Wipe dust and dirt from pure solvents such as acetone or isopropanol,
2. Use clean fine sand abrasive for sandblasting or shot blasting,
3. Clean the solvent again and wipe off loose particles

Plastic/Rubber:
1. Wipe with isopropanol,
2. Wear with fine-grained abrasives,
3. Wipe with isopropanol

Glass:
1. Use acetone or butanone to wipe the surface with solvent,
2. The thin coated glass of the applied silane bonding promoter is bonded before the bonding surface is completely dried,
*Attention: When using solvents, extinguish all ignition sources and follow the manufacturer's precautions and instructions for use,
For more details and adhesive product application solutions, please contact 3M authorized authorized authorized distributor - Suzhou Zhuanxin Electronics
Professional sales personnel from Materials Co., Ltd., we will wholeheartedly serve you

As a pioneer in adhesive technology, 3M's adhesive products have always been highly praised by industry customers in the handheld device assembly market, ranging from the structure of handheld devices

Component assembly, circuit board bonding, and bonding to displays, batteries, and other electronic components. Suzhou Zhuangxin Electronic Materials Company provides not only high-quality products, but also a set of tailored overall solutions for customers,

Scotch Weld structural adhesive 3M high-strength structural adhesive is basically a load-bearing formula, and the bonding strength is usually the same as that of the bonded material, sometimes exceeding its strength. These adhesives are usually linked or thermosetting, including epoxy resin, phenolic resin, polyurethane, acrylic acid, and hydroxyacrylic acid. Two component epoxy adhesive, high strength, high impact resistance, suitable for various occasions, is a pre packaged two component adhesive, Using the 3M EPXTM sizing system, the operation is simple and fast, doubling the work efficiency, reducing waste during mixing, and saving costs