Baoshan Brand BS-218 Small and Medium Knitted Fabric Steam Preshrinking Machine for Clothing Factory

Clothing factory pre-shrinking machine BS-218 small and medium-sized Baoshan brand knitted fabric steam pre-shrinking machine; Manufacturer Zhaoqing Tonghui Clothing Machinery;

Automatic fabric feeding, steam solenoid valve control for steam injection and humidification, adjustable steam temperature (80 ° C to 150 ° C), high-temperature pre shrinkage

Advantages; No tension automatic fabric feeding, adjustable steam temperature, steam drying to prevent moisture in the fabric, counter the number of yards or meters, blow cooling, and finally neatly arrange and stack the fabric.

Steam drying energy-saving shaping, counter measuring meters or yards, blow cooling and shaping, neatly arranged and stacked.

Wooden box packaging

1. Tensionless automatic fabric feeding, using an upper pressure basin to maintain steam humidity and temperature. The steam temperature can be adjusted (100 ° C to 150 ° C), and the steam drying function is set to better enhance the pre shrinkage effect of the fabric.

2. The steam flow rate of the steam basin is designed to spray steam evenly, making the pre shrinkage area of the fabric more stable. The speed can be adjusted according to the pre shrinkage requirements of the fabric.

3. All central pre-shrinking functions are made of stainless steel material, effectively preventing rust and enhancing durability.

4. Equipped with a coding device, it can accurately measure the length of the shaped fabric and has a cooling and shaping effect.

5. The folding of the fabric has a swinging arm that folds the fabric loosely and neatly, making it easy to arrange and place.

Main parameters of knitted fabric pre shrinking machine:

Model: BS-218

Voltage: 220V

Power: 4.5KW

Size: 2560x1180x1440mm

Fabric width: 0-2 meters

Circuit electrical appliances; Schneider electric appliance is used. Good electric appliance configuration allows you to use it with confidence, without worrying about Glitch, which may cause work stagnation.

Power system: Adopting a Dongyang drum reducer motor, continuously variable frequency speed regulation, to reduce mechanical faults.

Three operating methods

1. When loading cloth, please place the cloth roll on the two rollers on the machine body, move and adjust the cloth blocking frames on both sides to support the cloth roll, open the upper cover of the steam basin, pass the cloth through the steam spray basin, and place it in the cloth hopper. Press the code meter and pressing shaft onto the transmission shaft.

2. Press the power switch, turn on the steam switch, turn on the steam heating switch, adjust the required temperature of the steam, turn on the blowing cooling switch, and wait for the steam to spray. Slowly rotate the speed control knob to find the appropriate pre shrinkage speed you think, and the machine will start normal pre shrinkage of the fabric.

3. When a roll of cloth is finished walking on the machine, press the "Stop" button to remove the grey cloth from under the machine.

4. When you want to completely stop the machine, you must unplug the lever seat or turn off the switch.

218 Knitting Fabric Preshrinking Machine

Maintenance precautions

1. Regularly add lubricating oil (high-temperature butter) to each transmission part (gear, chain) and Peilin of the machine 1-2 times a month;

2. After the machine is relocated to its original installation position, please make sure to adjust the level;

3. The steam tray in the pre shrinking area of the machine is equipped with a stainless steel mesh. If the raw material is frequently pre shrunk, the raw material and fine wool will fall into the steam tray, which will block the drainage pipe opening over time. It needs to be cleaned regularly. Otherwise, once the drainage pipe opening is blocked, the condensed water in the steam tray cannot be discharged. When steam is sprayed, it will bring out the condensed water in the steam tray together, causing the mesh belt to carry water and causing water stains on the pre shrinking shaped fabric. Therefore, Regular cleaning is necessary;

Stepless automatic fabric placement, steam pre shrinkage, adjustable steam temperature (100 ° C to 160 ° C), integrated steam drying, electric heating and drying, coding, blowing and cooling, and then arranging and stacking the fabric

1. Product installation service: Delivery within three days after receiving the deposit, installation and debugging, usage methods, and common troubleshooting training;

2. Product maintenance services are provided by on-site manufacturer personnel to ensure timely and effective maintenance services; Lifetime maintenance of equipment, unconditional repair within one year due to manufacturing quality issues; Truly enabling customers to use without worry;

3. Product quality assurance: The factory products have undergone strict testing and have been applied in enterprises, maintaining industry advantages in terms of cost-effectiveness;