Manufacturer provides standard star shaped dischargers, dust collectors, ash discharge valves, and Dongyu Environmental Protection can customize them

This product is the main equipment for storage, feeding, quantitative feeding, airflow conveying, and dust removal in the dust removal equipment system. It can evenly and quantitatively remove dust from the dust collector hopper, while ensuring the airtightness of the dust removal system. Suitable for wide application in industrial sectors such as environmental protection, metallurgy, chemical industry, grain, food, power, etc.

During work, dust falls by gravity and fills the star shaped blade spaces on the top and sides. The impeller rotor is driven by the transmission shaft of the reducer to continuously rotate. When the impeller grid containing materials turns to the lower part, the dust is unloaded by its own weight. It is composed of several parts, including a cycloidal gear reducer, a housing, and a rotor. There are two series and dozens of specifications. The inlet and outlet flanges are divided into square and circular ports.

Characteristics of the unloader:

1. Compact structure, beautiful appearance, and easy to use.

2. Smooth operation and low noise.

3. Due to the distance between the bearing and gearbox from the shell, there is a significant improvement in high temperature and lubrication.

4. Our factory can also design and manufacture according to user requirements. (Bracket coupling belt chain drive)

5. The unloader uses special lubricating grease for the 00 reducer. Please regularly check and add oil"

The main functions of the reducer in the star shaped unloader are as follows:

1. A reducer can reduce rolling inertia, usually by reducing the square of the speed ratio, and can timely control start stop and speed change.

2. By increasing the torque through a reducer, it is equivalent to increasing the input power, which can reduce the power required for the input motor (in situations where speed regulation is required). Generally, the motor is more expensive than the reducer, so a reducer is considered.

3. The reducer has a protective effect on the motor in transmission. During operation, the reducer bears a large torque. When overloaded, only the overload divided by the reduction ratio is transmitted to the motor. If directly borne by the motor, it may cause damage to the motor.

4. When the overload of the star type unloader is very large, the deceleration opportunity is damaged first, and the reducer can be restored to use only by replacing spare parts, which is relatively low in cost. If the motor is directly damaged, maintenance is relatively slow and high in cost.

5. When the motor is directly connected to the load for low-speed operation, in order to meet the output torque current, the motor will inevitably increase significantly, which will have higher requirements for heat dissipation and insulation of the motor. From the perspective of energy conservation, it is also not advisable. If a reducer is used, the impact of these problems can be reduced.