Overview
| brand | Cantonese snail | Nominal diameter | two |
| length | ten | material quality | Stainless steel A450 |
| Applicable scope | Automotive Fasteners | producing area | Huizhou |
| colour | colour | Functional purpose | |
| Packaging specifications | fifty | model | M2 * 10 |
| Customized or not | no | Order number | Yue Luo-132 6870 6820 |
| Standard type | European Standard | Delivery time | Within 72 hours |
| Performance level | 4.8 level | Material grade | Copper and copper alloys |
Product Details
The cylindrical pin is mainly used for positioning and can also be used for connection, and it is fixed in the pin hole through interference fit. Cylindrical pins are usually used for positioning without load or under very small loads, with a quantity of no less than two, distributed in the symmetrical direction of the overall structure of the connected parts, and the farther apart the better. The length of the pins in each connected part is about 1-2 times the small diameter. A cylindrical pin can also be used as a shaft, and a straight shaft can also be used as a cylindrical pin, or even a centering pin. So what is the difference between a shaft and a pin? Shafts can be used to transmit torque, withstand bending moments and torques, cylindrical pins can be used for positioning, withstand extrusion and shear forces. In a sense (such as small equipment), cylindrical pins can also be used as shafts.
"Specification label editing and broadcasting
Presentation format:
Thread specification d=M12, nominal length L=80mm, performance level 4.8 equal length stud bolt, complete mark: GB 901 M12 × 80 [1]
Product examples:
Double headed bolts generally require surface treatment, and there are many types of surface treatment for bolts, including electroplating, blackening, oxidation, phosphating, and non electrolytic zinc sheet coating treatment. However, electroplating fasteners account for a large proportion in the actual use of fasteners. Especially widely used in industries and fields such as automobiles, tractors, household appliances, instrumentation, aerospace, communication, etc. However, for Threaded fastener, it is not only required to have certain anti-corrosion capacity in use, but also to ensure the interchangeability of threads, which can also be called screwing in here. In order to meet the dual use performance of "anti-corrosion" and "interchangeability" required in the use of Threaded fastener at the same time, it is very necessary to develop special plating standards"
When fixing the centrifugal fan blade, due to the fact that the gasket, washer, and nut are separate components, there are more components used throughout the entire process, which is prone to omissions in component installation; Moreover, due to the relatively small volume of the gaskets, washers, and nuts, it is difficult to remove foreign objects inside the air conditioner by adjusting the gap between the centrifugal fan blades.
With the improvement of living standards, people's requirements for the comfort of seats and bedding are gradually increasing. The independent bagged spring pad has moderate softness and hardness, and is widely welcomed by people.
