Yancheng Shock Absorbing EVA Sponge Rubber Strip Foam Sheet Material Specification Customization Strength Factory

The main characteristics of the product are high uniformity of the material, which can be easily cut after coating without layering. Moreover, it has a high solubility with adhesive and will not produce non adhesive phenomenon. It is suitable for hot melt adhesive and acrylic oil adhesive coating. EVA foam substrate: Focused on the EVA foam substrate industry for sixteen years! The adhesive coating type EVA substrate formula has no adhesive phenomenon; The uniform thickness of the entire material can completely avoid the phenomenon of layering after cutting after coating. 0.3mm technology: domestic production technology for 3 ultra-thin substrates, industry 30.3mm seamless coil material uniformity of 3 to 0.05mm. Product characteristics: High elasticity EVA is a type of EVA with good elasticity, mainly used for nail polish shiny sheets, sand strips, insoles for shoe materials, packaging materials for products, electronic pads for shock absorbers, etc. The common RB hardness is 25 ° -30 °, which is soft and elastic, with excellent surface effect and hand feel. It is usually used as packaging materials, shoe materials with high requirements for electronic materials, and handbag accessories. Nail enhancement products are usually used as square blocks, glossy sheets, and sandwich materials. Customized according to customer needs, size, material, thickness, color, hardness, etc. Welcome to inquire or come to the factory for observation. The following are commonly used material plans: 1. Mold size: sheet material 1m * 2m

The thickness of the EVA lining manufactured by the process is 41-50MM, with a positive and negative tolerance of 0.6MM, and so on. If the thickness of the sheet is less than 2MM, it shall be calculated as 2MM. Make inner lining, press according to customer requirements, and then manually glue it into finished products. If there is a need for backfilling, it needs to be backfilled. It can also be fitted with velvet, velvet paper, etc. EVA foot pads are used for bonding general industrial boards, hooks, etc; Bonding of car door frame sealing strips, wheel arc decorative strips, and bar decorative strips; Adhesion of automobile, motorcycle, and electrical nameplate; Fixation of elevator reinforcement; Fixation of the rear bumper strip, decorative panel, front fender, door frame sunshade, and rearview mirror glass of the vehicle body. Keeping up with the times, we will use many high-tech products in our daily lives, but few people will know what materials are used. Hongli Hui introduces a material called EVA ball to everyone. Kunshan Jiashunda Adhesive Products was produced in 2004 and is a manufacturer engaged in the production and sales of environmentally friendly packaging materials, insulation materials, toys, gifts, and special adhesive products. The main products include sponge products EVA foam, pearl cotton products EVA products, colored EVA, EVA foot pads, EVA toys, rubber pads, pearl cotton, foam, and various shaped materials.
The characteristics of EVA foam:
Water resistance: Closed cell structure, non absorbent, moisture-proof, and good water resistance.
Corrosion resistance: resistant to corrosion from chemicals such as seawater, oil, acid, alkali, etc., 3. odorless
Processability: It is easy to perform processing such as hot pressing, cutting, gluing, and bonding.
Anti vibration: High resilience and tension resistance, strong toughness, and excellent shock/cushioning performance.
Thermal insulation: Thermal insulation, cold insulation and low temperature performance, resistant to severe cold and exposure to sunlight.
Sound insulation: Closed bubble holes, good sound insulation effect.
Style: Sheet material, thickness, size, etc. can be customized.
Color: Normal colors are black and gray. We can also produce different colors such as blue/red/yellow/white according to customer requirements.
packing of products:PE bag packaging, also available according to customer requirements
EVA material chemical Chinese name: - Acetic acid copolymer EVA foaming material is composed of the main material EVA, filler, foaming agent, bridging agent, foaming promoter, lubricant, auxiliary materials: leftover materials, anti-static agents, flame retardants, quick ripening agents, colorants. The raw materials are beaten into soft glue by a glue machine, and the soft glue is pressed into flakes by a roller machine. The flake material is then placed in a large flat foam mold. After a high temperature of 160 to 170 degrees Celsius, the time is generally 90 to 100 seconds, and the pressure is 150KG, Foam forming, this process produces sheet metal. Usually, technical indicators are selected based on hardness as the standard; There are many types of hardness, 1. High foaming 5% to 40%; 2. Secondary foaming 40% -55%, 3. Primary foaming 55% -75%; 45 on material hardness-

purpose
Reason for 45 degrees:Making EVA is just like making Mantou. The bigger a Mantou is fermented, the softer it will be, and the less materials will be used. To make a 55 degree one of the same size, more raw materials are required. So the EVA at 55 degrees is naturally higher!
Kunshan Jiashunda Adhesive Products Co., Ltd. Factory, manufacturer, physical photos, after-sales service, to satisfy and reassure customers. The required foam packaging materials. Your ideal economy and
Strength certification brand——Kunshan Jiashunda Adhesive Products Co., LtdThere are relatively good high elasticity EVA materials with 3 technologies that meet market demand. We have a team of product designers, management personnel, and designers with years of experience in the EVA material industry, constantly launching a series of products that meet market demand
Color, color, and can also be produced according to customer samples with actual colors approaching 90% of the standard. 5. Hardness: 25-30 degrees, 30-35 degrees, 38-42 degrees, 45-50 degrees, 55-60 degrees, 65-70 degrees, etc.
40"