Overview
| brand | Cooper | power | 2.2 (Kw) |
| type | specifications | ||
| voltage | 380V | weight | five hundred and forty |
| noise | 70dB | colour | |
| Airspeed | type | ||
| model | category | ||
| Desulfurization rate | Dust removal rate | ||
| Purification rate | ninety-nine point nine six seven | Liquid to gas ratio | |
| Processing customization | no | Rated frequency | |
| operational principle | Ignition temperature | ||
| Friction loss | Processing air volume | three thousand | |
| Imported or not | Inlet concentration | ||
| Filtering speed | Gas processing capacity | ||
| Overall dimensions | 1176 * 866 * 1990 | Replacement air volume | |
| Applicable fields | Power frequency | ||
| control mode | Power supply mode | ||
| Treatment concentration | Work resistance | ||
| Air outlet size | outlet temperature | ||
| Applicable area | Ringmann blackness | ||
| Negative ion concentration | Air purification technology | ||
| Dust concentration at the outlet | Air purifier air volume | ||
| Order number | Xl-f2 | product name | Smoke purifier |
| Number of filter layers | three | Usage Scenario | factory |
| efficacy | Adsorb smoke | Input power | 2.2kw |
| no-load speed | five thousand and eight hundred | Smoking tube | 1.4m |
| System flow | three thousand | wind speed | 17m/s |
| Air inlet interface flange | 150mm | ||
Product Details
New oxygen exciter smoke purifier XL-F2, power 2.2kw, negative pressure 2600Pa, air volume 3000m ³/ h. Size 1176 * 866 * 1950mm, suitable for 4020 laser cutting machine;
Metal frame structure, durable, pulse back blowing function, long service life of filter element, stable and reliable operation, large air suction volume, dust collection and filtration, UV tube odor filtration, activated carbon odor removal, UV tube odor removal Germicidal lamp;
Pulse back blowing function, high quality, long life, high negative pressure, large flow, long service life of filter element, good filtering effect, suitable for medium and large laser cutting, medium and large laser welding, medium and large laser cutting bed, etc.
This device is suitable for dry dust without viscosity, oil or water. When the dust contains viscosity, it enters the equipment through a pipeline and first comes into contact with the filter cartridge. Due to the stickiness of the dust, when the dust accumulates on the filter cartridge to a certain extent, the air compressor sprays compressed air from the inside out. However, due to the stickiness of the dust, the compressed air cannot blow off the dust attached to the filter cartridge, causing the filter cartridge to fail, The cost of consumables and labor will be very high, so pulse dust removal equipment is suitable for dry dust.
