Road surface shot blasting machine Small shot blasting machine Mobile manual concrete shot blasting machine Bridge roughening steel plate rust removal machine

1. Strictly follow the personnel and job training for operating this equipment, and be familiar with the performance and characteristics of the machine. 2. Familiar with the operating procedures, usage, maintenance, and upkeep of the shot blasting machine in the user manual. 3. Operators must check whether various switches in the control cabinet (panel) are in the required setting positions (including power switches) before starting the machine to avoid misoperation, damage to electrical and mechanical equipment, and equipment accidents. 4. Non local operators are not allowed to operate or touch the electrical switch control area without permission, and are not allowed to approach the working area of the machine to avoid accidents. 5. Operators must wear protective work clothes, glasses, etc. 6. When the operator starts the machine, pay special attention to the various instrument indications on the panel. Only when all instrument indications reach normal values can the small crane (roller table) be operated to enter the working program. If significant errors are found in individual instrument indications (abnormal), immediately shut down the machine. Only after troubleshooting the equipment can it start up and work normally. 7. During the operation of the equipment, the operator must inspect the equipment for any abnormal noise or overheating in various parts. When serious equipment faults are found during operation, press the emergency stop button to stop and wait for repair, and cooperate with professional personnel to troubleshoot the equipment. 8. The operator must carry out daily and weekly maintenance (including lubrication) of this equipment according to the equipment management. Clean the dust and debris inside the dust collector in a timely manner every week to avoid affecting the dust removal quality and ensure the integrity of the equipment. 9. Operators must ensure civilized and safe production while strictly implementing the handover system. 10. After the work is completed, immediately turn off the power switch of the machine to prevent it from running. And clean up the work site. Yugong198995denlying