Sichuan Guangyuan Integrated Prefabricated Pump Station Buried Sewage Lifting Equipment with a Diameter of 2.3 meters

Sichuan Guangyuan Integrated Prefabricated Pump Station Buried Sewage Lifting Equipment with a Diameter of 2.3 meters

Integrated prefabricated pump station: The integrated prefabricated pump station is mainly composed of composite wrapped fiberglass reinforced plastic cylinders, which are equipped with submersible sewage pumps, automatic coupling devices, pipelines, valves, control systems, ladders, maintenance platforms, etc. According to user needs, basket grilles and crushing grilles can also be added after the inlet pipe. The cylinder is equipped with fiberglass, which is a complete set of equipment that integrates all equipment and instruments together. It is a convenient to use, reliable in quality New integrated pumping station equipment with less civil work, optimized volume, and low cost.

The integrated prefabricated pump station is a pump station installed in the sewage pipeline network to pump urban sewage. Because sewage pipes, unlike water supply pipes (tap water), do not have pressure and rely on the gravity of sewage to flow. Due to the wide area of sewage collected by urban sewage network pipes, they are far away from sewage treatment plants. It is impossible to bury the pipeline very deep, so it is necessary to set up a pump station to raise the elevation of the sewage.

During the operation of the integrated prefabricated pump station, it collects waste water below the level of the sewer and discharges it away from the municipal sewage pipe network and sanitary facilities, and uses the lift of the sewage pump to transport the sewage to the sewage pipe network. It is often used for the construction and renovation of municipal sewage pipelines, playing an important role in sewage pipelines, and is one of the important components of sewage engineering pipelines.

Selection of integrated prefabricated pump station grating:

In fact, the selection of grilles is mainly based on various factors such as the project site environment. Below is a brief introduction to the differences between basket grilles and crushing grilles. The integrated prefabricated pump station generally adopts two schemes for the use of grids, one is the basket grid, and the other is the crushing grid. Their common point is that they are all aimed at intercepting debris at the inlet of the integrated sewage pump station, to prevent a large amount of debris from blocking the submersible sewage pump and pipeline.

The difference is that when there is a lot of debris intercepted by the basket grille, it needs to be manually lifted up and emptied through the track lifting chain. Otherwise, excessive debris will affect the flow of the water inlet, which is similar to the image of a miscellaneous basket in a household kitchen sink. And the crushing grid is electric crushing, and after placing the crushing grid at the water inlet, the crushing grid will automatically start at regular intervals.

When the drum rotates, the debris is carried to the middle of the mixing knife for crushing. When the debris is crushed into small particles, it follows the water flow into the bottom of the integrated prefabricated pump station in Chengdu and is discharged through a submersible sewage pump. This saves manpower from frequently checking the debris in the grille frame at the pump station. So the price of crushing grilles is much higher compared to basket grilles.