Overview
| brand | Bingteng Machinery | Does it support processing customization | |
| Imported or not | no | UV main peak wavelength | |
| material quality | Dust removal principle | ||
| Electroplating power supply | Electroplating position | ||
| voltage | Power form | ||
| Seed plating | Air changes per hour in the room | ||
| Internal diameter size of the room | Outer diameter size of the room | ||
| power | Material supply method | ||
| specifications | Mixed approach | ||
| Air volume of intake fan | Air consumption | ||
| Empty displacement | type | ||
| Full load chamber wind speed | Baking time of topcoat | ||
| Spray width | Jet flow rate | ||
| Spray distance | Nozzle diameter | ||
| Nozzle diameter | twenty | Fuel consumption of burner | |
| Heating time | Applicable scope | surface treatment | |
| Coating width | Coating speed | ||
| Coating cup capacity | Coating supply method | ||
| Coating spray amount | Coating speed | ||
| Overall dimensions | temperature | ||
| model | Pressure ratio | ||
| Scope of use | Effective working width | ||
| type | weight | ||
| Installed capacity | Maximum baking area | ||
| Maximum output pressure | Optimal spraying distance | ||
| pressure | 0.5-0.7Mpa | Number of nozzles | 12 pieces |
| purpose | Sand blasting to remove oxide and black skin, increase adhesion | Sample cycle | 1-3 days |
| producing area | Zhongshan, Guangdong | Inlet size | 800 X250mm (customizable) |
| Abrasive recycling method | Two options for wind/mechanical | Total power | ~13KW |
| The total power of the equipment, t, except for the air compressor | About 10KW | Equipment footprint | Approximately 15 square meters, with a minimum height requirement of 3.5 meters |
| Processing trade form | Incoming processing | ||
Product Details
Trading Area
Global