Customized caterpillar type burr machine, fully automatic sandblasting machine, plastic parts, bakelite framework, small parts, deburring and sharpening

technical parameter

The characteristics of Dongguan Zhicheng tracked edge:
1. Precision welding of 2.5mm-6mm steel plates and steel structures;
2. The appearance is cleaned and sandblasted by removing oxide skin and welding slag, followed by electrostatic powder spraying;
3. All electrical components shall be of well-known brands;
4. The front and back of the assembly line and the speed can be adjusted and controlled by frequency conversion;
5. The sandblasting gun can swing back and forth with variable frequency adjustment control;
6. The sandblasting gun holder is 360 ° simulated arm, and various spraying angles are adjusted;
7. The sandblasting abrasive enters the cyclone separator through the inner compartment for filtration, recycling, and reuse;
8. Automatic quantity counting and insufficient sand material signal prompt during sandblasting processing;
9. Blow air cleaning and multi-layer brush cleaning at the discharge port to prevent sand waste;
10. Safety device for conveying emergency stop signals after anti freeze and anti pinch hand induction;
11. High precision, complete efficiency, easy operation, and the ability to replace sand according to the process requirements of the workpiece;
12. The environmentally friendly dust removal box adopts pulse intermittent timing automatic dust removal, with high dust removal efficiency and low noise.
13. Equipped with timed automatic sandblasting and jog positioning functions;
14. Convenient loading and unloading of workpieces, simple operation, and saving human resources;
15. The size of the track roller and the number of spray guns can be set according to customer requirements

Principle of track type burr machine:
It is used to process the rough edges of thermoplastic products formed by compression or injection molding. The combination of self-sufficient projection device, chassis, belt conveyor, dust collection device, etc. It is a spray washing machine with a simple appearance, space saving, and high efficiency.
The projection material is projected onto the product by a high-speed rotating impeller, and can be removed in a short period of time for sheet like burrs and burrs in the concave or hole. The size of the projection force can be adjusted by adjusting the appropriate number of rotations on the frequency converter keyboard on the control panel.
The spray washing room is composed of a circular belt conveyor, and all indoor areas are covered with rubber. The input products are stirred in a forward rotation while being uniformly removed by the impact of high-speed projection materials.
The projected projection material can be continuously used through an exquisite circulation system. The powdery burrs and smaller projection materials are attracted and captured by the dust collector, while larger burrs are filtered out by the screen.
In the middle of the suction pipe, there is a humidification nozzle. An appropriate amount of moisture can enhance the spraying effect, prevent dust from adhering, and increase the lifespan of the projection material.

Real time display