Cement reinforcement agent for sand removal, surface penetration solidification, wear resistance and hardening treatment of concrete

Concrete surface reinforcement agent
This product can rapidly react with free calcium in concrete through full penetration, increasing the density of the structure, and forming a solid solid solid like a stone on the surface of the concrete structure. This greatly improves the strength and wear resistance of the concrete structure surface, resulting in a closed, sturdy, wear-resistant, dust-free, water resistant, and most industrial chemical corrosion resistant surface. Mature sealing will not wear out like the surface coating with use. This product locks the pores and makes the concrete harder and harder, resulting in better sealing performance.

Surface Reinforcement Agent Construction Process
1. Before formal use, it is recommended to conduct on-site small-scale tests and confirm the effectiveness and dosage before large-scale use. (Please stir well before application).
2. On the cleaned concrete surface, spray or roll coat the concrete surface reinforcement agent (usually one pass, depending on the effect of the first pass, preferably between 2 and 12 hours after the first pass of construction), and maintain a saturated wet state for 10 to 20 minutes to facilitate more effective ingredients to enter the interior of the concrete.
3、 Packaging and storage
Appearance: Colorless water-based liquid
Dosage: 2-4m2/kg (specific dosage depends on the ground condition test).
Packaging: 50kg/barrel