Overview
| brand | Aoshen | water temperature | 25 degrees |
| diameter | voltage | 220/380 | |
| model | ASP-1000 | power | two point five |
| size | height | one point six | |
| display | series | ||
| specifications | flow | ||
| water quality | Suitable for tap water, groundwater, and river and lake water systems as sources of incoming water | Membrane logarithm | |
| Water yield | Manufacturing according to the water demand of the owner | Water production capacity | |
| Algae killing rate | 99.9% | conductivity | Below 10us/cm |
| Water output | Desalination rate | 99.5% | |
| Sterilization rate | 99.9% | Resin tank | |
| Effluent hardness | ≤ 0.03mmol/L | Rated frequency | |
| Rated output | Imported or not | ||
| Inlet diameter | working temperature | ||
| Operating pressure | working pressure | ||
| Rated capacity | Operating mode | ||
| Raw water hardness | Device Name | ||
| Is it scale inhibiting | Tank body under pressure | ||
| Effluent capacity | Water outlet method | ||
| Treatment process | Application devices | ||
| Inlet pressure | Drinking method | ||
| Processing customization | yes | Operation mode | Automatic/manual modes |
| Usage occasion | Net weight of equipment | ||
| Influent turbidity | Protection function | ||
| Filter material | Single unit output | ||
| Installation method | Inlet water temperature | ||
| control mode | Water and electricity resistivity | ||
| Inlet and outlet | Cooling method | ||
| Household/Commercial | Swimming pool capacity | ||
| Fur aggregator | High efficiency filter | ||
| Fresh water recovery rate | Resin filling capacity | ||
| Salt content of raw water | Swimming Pool Category | ||
| Hot water output | Precision (microns) | ||
| Do you need to power on | Net content (specification) | ||
| Can a filter be installed | |||
Product Details
Process flow:
Raw water tank - Raw water pump (backwash pump) - Multi layer filter - Activated carbon filter - Dosing system (scale inhibitor) - Security filter - RO reverse osmosis host - Pure water tank (concentrated water tank) - Ozone ultraviolet sterilizer - Water supply pump - Outlet water
1. Raw water tower: stores water from the external network for use in the pre-treatment system, with a reservoir available for reduction,
2. Raw water pump: This system is equipped with a water pump to pressurize the raw water
3. Sand filter: This system is equipped with a mechanical filter (including imitation fiberglass, carbon steel, fiberglass, and stainless steel). The filter is filled with refined and well graded quartz sand, which is used to intercept suspended solids, colloids, and other impurities in the influent, purify the influent water quality, and achieve (pollution density index) SDI ≤ 4; Manual control is adopted,
4. Carbon filter: This system is equipped with one filter. Fill the filter with specialized coconut shell activated carbon This system is used to absorb residual chlorine and organic matter in the influent water. Manual control is used to make the residual chlorine in the water ≤ 0.05ppm,
5. Scale inhibitors: Scale inhibitors are a series of chemical agents used to prevent the precipitation and scaling formation of crystalline mineral salts, which hinder the growth of salt crystals in RO influent and concentrated water. There are many factors that can affect the formation of mineral scaling, and a decrease in temperature can reduce the solubility of scaling minerals, (Except for calcium carbonate, which, contrary to most substances, decreases in solubility with increasing temperature.) An increase in TDS will increase the solubility of insoluble salts (this is because high ion strength interferes with the formation of crystal seeds), and the LSI can reach+1.0,
6. Reverse Osmosis Desalination (RO) Part: The RO device is the heart of the system, and whether the design is mature and reasonable not only directly determines whether the RO system can meet the design requirements, but also relates to the service life of the RO membrane. The water treated by the RO device can remove the majority of inorganic salts and almost all organic matter, microorganisms, and reasonable operation of the RO membrane can be used for about five years.
7. Pure water tower: used for storing pure water Pure water must be stored in a sealed manner. Only air filters should be left to isolate dust and bacteria in the air. After the pure water tower, it should be decided whether to use a pure water booster pump according to the actual situation. Whether to supply water at constant pressure should be determined by the booster pump.
8. Ozone sterilizer (optional) can completely ensure the cleanliness and hygiene indicators of the product water by killing bacteria caused by secondary pollution.
Operating parameters and effluent indicators of reverse osmosis equipment
Single machine output: 0.25M3/H-120 M3/H (customized according to customer needs)
Desalination rate: reverse immersion system>98% (customized single or double stage according to customer needs)
Operating pressure: 1Mpa to 1.2Mpa
Recovery rate: 50% -80%
Product effluent conductivity:
Typical customers and application scope of reverse osmosis pure water equipment:
The use of water for the production of food professional materials, such as the blending of additives, ingredients, soup or juice ratios, can improve the taste, inhibit the proliferation of organic matter, and increase the retention period of goods
·The preparation of professional water for dairy, beverage, and liquor production advocates the use of two-stage reverse osmosis equipment to avoid unpleasant taste caused by foreign objects in the water, and to maximize the improvement of product quality, suppress the proliferation of organic matter, and improve the retention period of products
·Chemical occupational water is used for the proportion of chemical materials and liquids, chemical product production, chemical circulating water, etc., effectively avoiding additional chemical reactions and quality deviations caused by ion overload in water
·The water used for professional electric boilers is used for boiler makeup water, as well as for the power system of thermal power generation boilers and low-pressure boilers in factories and mines, to improve production power and extend the service life of equipment.
·Desalination of seawater and brackish water for drinking is used for desalination of water sources in islands, ships, offshore drilling channels, and brackish water areas, to achieve direct drinking standards.
·Water supply for animal husbandry and horticulture is used to dilute brackish water, promote animal growth, and avoid various diseases caused by water quality issues.
