Intelligent electronic pressure weighing sensor, force measuring sensor with complete specifications and customizability

Load Cell

(commonly known as load cell/sensor/weighing module)

Product Name: Weighing Sensor

Specification and model: PLRP9363 type

Product Introduction

PLRP/HBB high-precision weighing sensors are commonly used sensors in measuring and weighing equipment, and can provide stable and uninterrupted weighing

Heavy weight and feedback as industrial production measurement data are widely applicable to dynamic and static measurement and control equipment.

Composition of weighing sensors

The weighing sensor consists of four parts:
Sensitive components, transformation components, measuring components, auxiliary power supply.

System characteristics

Excitation voltage: 10VDC ± 5;

Sensitivity output: 2-3mV/V;

Non linearity: ＜ 0.02 of rated output;

Repeatability:<0.01 of rated output;

Creep: ＜ 0.02 of rated output;

Applicable temperature: -2060;

Overload capacity: 150% of the sensor capacity;

Temperature sensitivity: ± 0.0003 at zero value and ± 0.0004 at full value

Safety overload: 150

Main technical parameters

Rated load 10,20,30,40,50,75100150200,

9355K load cell

9355K load cell

9310 Load Cell

250300500kg edge resistance 5000M Ω

Safety overload 150F. S

Comprehensive error 0.02F. S Overload limit 300F. S

Creep 0.02F. S Recommended excitation voltage 1012V (DC)

Zero balance 1F. S large excitation voltage 15V

Zero point temperature effect 0.02F.S/10 Sealing grade IP68

Output temperature influence 0.02F.S/10 material alloy steel/stainless steel

Input resistance 10 Ω, cable length: 612m; Diameter: ¥ 6mm

Output resistance 5 Ω Input+: red; Input -: black; Output+: Green; Output -: White

Wiring method for weighing sensors

There are two wiring methods for weighing sensors: 4-wire and 6-wire, and the wiring for modules or weighing transmitters can also be 4-wire and 6-wire

There are two options, whether to connect 4-wire or 6-wire, depending on your hardware requirements. The principle is that the sensor can connect 6-wire

If it is not connected to a 4-wire, it is necessary to short-circuit it if it must be connected to a 4-wire.
The general weighing sensor is a six wire system. When connected to a four wire system, the power cord (EXC -, EXC+) is connected to the

The feedback lines (SEN -, SEN+) are shorted separately. SEN+and SEN - are used to compensate for line resistance. SEN+and

EXC+is pathway dependent, SEN - and EXC - are pathway dependent.

Working and installation conditions

Environmental temperature:
three thousand two hundred and sixty
Power supply voltage:

10VDC (± 10, -15), 50HZ (± 2)

Xuzhou Kelin Machinery Equipment Co., Ltd

Electronic belt scale

ICS-14 Electronic Belt Scale

ICS-17A Electronic Belt Scale

ICS-17B Electronic Belt Scale

ICS-20A Electronic Belt Scale

ICS-20B Electronic Belt Scale

ICS-30 Electronic Belt Scale

CLM series belt scale chain code

XLM series cyclic chain code verification device

XLM type electronic belt scale international universal series standard chain code

XLM type static cyclic chain code verification device

XLM type dynamic cyclic chain code verification device

Pressure resistant weighing coal feeder

NJGC-30 pressure resistant weighing fully enclosed coal (material) feeder

NJGC-30 II type pressure resistant weighing fully enclosed coal (material) feeder

Weighing feeder

JGC-40 Open Belt Weighing and Feeding Machine

LXC weighing spiral feeder

Electrical control system of pressure resistant weighing coal (material) feeder

Pressure resistant weighing control system for coal (material) feeding machine

Supporting components of pressure resistant weighing coal (material) feeder

HK-2000 Type II Centralized Microcomputer Batching System

Diaphragm compressor

GZ diaphragm compressor

GV type diaphragm compressor

GD type diaphragm compressor

GL type diaphragm compressor

spare parts

Type 2105, 201, 2000, and 6105 weighing control instruments

Load cell STC/HBB/MBB/PLS/LOC series

Speed sensor E6B2/60-12C/OVW2

Tear switch/Under speed switch/Pull switch/Anti deviation switch Belt conveyor protection device

Ring type non interface high-temperature resistant tape

Clean spare parts such as chain scrapers.

Various bandwidths and specifications of idlers, main drive driven rollers

L Alarm device

Belt scale chain code CLM XLM

Manual and electric inlet and outlet material valves

Sampling heads for various series of steam mining, intermediate mining, head mining, and fire mining