Overview
| displacement | Wheelbase | ||
| speed | Track gauge | ||
| Delivery distance | lift | ||
| voltage | current | ||
| Number of poles | granularity | ||
| amplitude | horsepower | ||
| stroke | Net weight | ||
| Gradient | productivity | ||
| Transmission | Shelf life | ||
| Gas consumption | Recovery amount | ||
| Flatness | Excitation force | ||
| Balancing weight | Track width/rear | ||
| Track width/front | Discharge method | screw | |
| Number of impellers | New and old degree | ||
| Pump shaft position | Loading height | ||
| Aggregate size | Number of trips | ||
| Customized or not | Processing customization | ||
| Degree of crushing | control mode | ||
| Pitch angle | Leg span | ||
| Rotation method | Working radius | ||
| Cement silo | Discharge speed | ||
| Feed speed | Climbing ability | ||
| Front wheel axle | service life | ||
| Applicable models | Loading quality | ||
| Composition structure | Conveying pipe diameter | ||
| Water pump flow rate | Aggregate size | ||
| processing capacity | Stone size | ||
| Cross slope error | Directional control method | ||
| Paving width | Compacted thickness | ||
| Traveling mechanism | Paving thickness | ||
| Mixing cylinder capacity | Discharge capacity | ||
| Effective lifespan | Mixing depth | ||
| Conveying distance | Concrete slump | ||
| Rod head length | Sieve size | ||
| Independent height | End hose | ||
| Conveying pipe diameter | Tower body section | ||
| System flow | system pressure | ||
| Fabric radius | Delivery pressure | ||
| Is it the original factory | Is it customizable | ||
| Concrete pipe diameter | Mixer model | ||
| Cement screw machine | Inclination angle of mixing drum | ||
| Discharge residual rate | Auxiliary brake | ||
| Mixing drum length | Applicable water cement ratio | ||
| Inner diameter of conveying pipe | Rotor capacity increase | ||
| Feed inlet height | Outlet height | ||
| Storage hopper capacity | High work efficiency | ||
| Climb box spacing | Hopper lifting speed | 10 meters/minute | |
| Maximum aggregate size | 1/3 | Rated feed capacity | seven |
| Horizontal length of boom | Supporting host model | ||
| Aggregate conveying capacity | Sand conveying capacity | ||
| Accelerator additive | Dust concentration during operation | ||
| Type of concrete machinery | Fabric spreader | Concrete outlet pressure | |
| Mixing tank conveying capacity | Continuous adjustable injection volume | ||
| Number of vibrations per minute | Theoretical conveying capacity of concrete | eight | |
| Theoretical concrete conveying capacity | Water pump model of water supply system | ||
| Measurement accuracy of asphalt powder | Maximum outlet pressure of concrete | nine | |
| Height of the upper opening of the feeding hopper from the ground | Continuously adjustable dosage of accelerator | ||
| brand | Jinyi | model | Customized |
| Rated discharge capacity | five | Motor power | 8 kW |
| Mixing power | 0 | Mixing drum speed | four |
| Mixing shaft speed | one | Overall dimensions | 6+1.5+2.3 meters |
| Overall weight | 2 tons | specifications | Spiral type, drawer type |
Product Details
Production process flow of Jinyi concrete precast block distribution machine:
1. Pass the concrete slurry transported by the mixer truck through the inclined hopper. Lift to the mobile material receiving system.
2. The mobile material receiving system includes an automatic weighing system and a double screw feeding system
3. The vibration forming system contains high-frequency vibrators for rapid vibration forming;
4. The intelligent operation box controls the operation of all systems of the entire equipment, and the touch screen operation is simple and fast.
5. Rolling conveying: conveying, accumulating and forming prefabricated blocks, and transporting multiple blocks at once to improve efficiency.
6. Cleaning steps: During the rest period, it is convenient for workers to clean the remaining concrete in the mobile material receiving system
Repeated experimental improvements have been made to the easily worn parts of the concrete prefabricated component production line, which are composed of a motor, a screw pusher, an air compressor, and other components.
It can continuously produce 10000 to 20000 cubic meters of concrete components, and can produce cable trench, side ditch cover plates, hand hole well cover plates, etc. It is durable and wear-resistant, and can continuously produce more than 50000 meters with guaranteed efficiency and after-sales service. It is a high-speed section concrete small prefabricated component production machine produced using technology.
The production line for small prefabricated components includes various types of highway and railway fences, as well as road covers for municipal construction. According to customer prefabrication requirements, prefabricated components of different lengths, widths, and load-bearing machinery can be customized, with automatic loading, continuous operation, and vibration forming. The prefabrication speed is much faster than manual operation, which is not only suitable for high-speed section construction, but also for airport, municipal construction, and road construction.
Jinyi Concrete Small Prefabricated Block Distribution Machine Automation Production Line.
Used for the construction of various types of curbstones and curbstones on outdoor roads and bridges, highways, airports, national highways, urban roads, residential areas, etc., such as the production of hexagonal slope protection, U-shaped drainage ditches, side ditch cover plates, skeleton water blocking, road surveying stones, handhole well cover plates, soil shoulder precast blocks, arch skeleton slope protection, cutting maintenance steps, and other prefabricated projects.
The various specifications of U-shaped drainage ditches, curbstones, and side ditch covers produced by automated production machinery and equipment for prefabricated block fabric machines are widely used in water conservancy and road and bridge engineering construction. Such as high-speed rail, Maluoyazi, water conservancy engineering, road and bridge engineering construction, etc. This machine can produce various specifications of U-shaped drainage ditches, side ditch covers, curbstones, etc., with good texture, strong density, and compliance with the strength grade of cement products specified by the country. It is an essential machine for the production and construction of high-speed sections and road and bridge engineering. This machine is divided into standard and customized versions, and requires 2-3 people to complete the operation step by step. The production capacity can reach 10 cubic meters per hour, which is a sharp tool for producing U-shaped drainage ditches;
Operation process of Jinyi concrete precast block distributor
1. Prefabricated block fabric machine has fast disassembly and assembly, convenient transportation, and low requirements for the working site
The 2 prefabricated block fabric distribution machine can greatly reduce the intensity of manual labor, and workers in small prefabricated factories will no longer be tired from it
3. Automated operation of the production line for prefabricated block fabric machines, saving half of the labor and doubling the production efficiency
4. The operation of the prefabricated block material distribution machine is controlled by the control panel joystick, and the concrete is fed and the small prefabricated parts are formed. One person can operate the entire machine to operate
5. Prefabricated block fabric machine operators do not require training, effectively reducing accidents for on-site personnel
6. The operation of the prefabricated block fabric machine equipment is simple and safe, and it can operate 24 hours without stopping;
7. The prefabricated block fabric distribution machine has undergone high-strength gravity testing and pressure operation design, with few faults.
