Overview
| brand | Sandwich | Product characteristics | Air leg style |
| model | Yt28 | product name | Pneumatic rock drill |
| Hole diameter | 34mm~42mm | Drilling depth | 5m |
| Drilling speed | ≥ 350mm/min | Impact energy | 44-73 |
| Impact frequency | 28Hz~36Hz | weight | 1.02kg |
| Inner diameter of trachea | 25mm | Inner diameter of water pipe | 13mm |
Product Details
Please contact us for orders: 17373897710
1YT28 air leg rock drillPurpose, scope of use, and model meaning:
YT28Air leg rock drillIt is a type of rock drilling machine. It is applied in mining roadway excavation and various rock drilling operations to drill and drill blasting holes. It is an indispensable and important tool in metallurgy, coal rock, railway, transportation, water conservancy construction, and stone engineering.
YT28Type rock drillIt has a wide range of applications and is suitable for drilling horizontal and inclined blast holes on medium hard or hard (f=8-18) rocks. It can also drill anchor holes on the roof vertically upwards. The diameter of the blast hole is generally 34-42 millimeters, and the effective and economical drilling depth can reach 5 meters. This machine can be used in conjunction with the FT160BD short air leg and FT160BC long air leg according to the size of the tunnel section. It can also be installed on a drilling truck or drilling frame to work.
IIYT28 air leg rock drillModel and representative significance
Y: Product type: Pneumatic rock drill
T: Structural feature: Air leg style
□: Main parameter: Machine weight, kg
IIIYT28 air leg rock drilloperational principle
YT28Rock drillIt uses compressed air to push the piston back and forth. During the stroke, the piston impacts the drill tool to break rocks: during the return stroke, the piston drives the drill tool to rotate at a certain angle. Continuous impact and rotation cause the drill tool to cut circular holes in the rock.
IVYT28 air leg rock drillPiston stroke:
As shown in Figure 1, when the control lever (32) is placed in the operating position, compressed air enters the rear chamber of the cylinder block (6) from A: pushing the piston (5) forward. When the trailing edge of the piston V2: opens the push valve hole T2, a portion of the compressed air enters the valve cabinet (2) through T2, and the push valve (10) reverses direction, closing the stroke air circuit A (while opening the return air circuit B). At this time, the piston works by inertia and pressure expansion, continuing to forward, striking the drill tail, and completing the stroke movement.
Custom instructions
Please contact us by phone if you need to place an order
Manufacturer, the company has a short production cycle and guaranteed product quality
2. Description
This product is for reference only and may vary depending on the product configuration. Please consult customer service for specific information.
3. Payment method
Delivery upon payment;
If the return is caused by the buyer's reasons, the buyer shall bear the logistics fees, inbound and outbound fees, etc; If the return is caused by the supplier's reasons, the supplier shall bear the logistics fees, inbound and outbound fees, etc.
When purchasing, please provide your company's information, mailing address, and recipient's phone number to the sales personnel. We will deliver to you by express delivery (the courier fee will be borne by us)
6. Contact us
Telephone and WeChat account: 17373897710