Long term supply of specialized plate heat exchangers for HVAC, stable quality of heating plate heat exchangers

　　The price is for reference only, please consult the seller for specific model prices!

A plate heat exchanger is composed of a set of corrugated metal plates with four corner holes for the passage of two types of liquid for heat transfer. The metal plate is installed in a frame with a fixed plate and a movable compression plate on the side, and is clamped with clamping bolts. The plates are equipped with sealing gaskets to seal the fluid channels and guide the fluid to flow alternately into their respective channels, forming heat exchange. The flow rate, physical properties, pressure drop, and temperature difference of the fluid determine the number and size of the plates. The ripple of the plate not only increases the turbulence level but also forms many support points, which are sufficient to withstand the pressure difference between the media. The metal plate and movable compression plate are suspended on the upper guide rod and positioned by the lower guide rod, while the rod end is fixed on the support column. However, if one or both liquids pass through the heat exchanger more than once, the interface should be opened on the fixed plate and movable compression plate, and in most cases, one-way is used, All pipelines are connected to fixed pressure plates. Check and remove the shoes to open the heat exchanger, and there is no need to disassemble the pipelines.

The detachable plate heat exchanger is composed of many stamped corrugated thin plates at certain intervals, sealed with gaskets around them, and overlapped and compressed with frames and compression screws. The four corner holes of the plates and gaskets form the distribution and collection pipes of the fluid, while reasonably separating the cold and hot fluids to flow in the flow channels on both sides of each plate, and conducting heat exchange through the plates.

Compact structure: The plates of plate heat exchangers are closely arranged, and compared to other types of heat exchangers, plate heat exchangers occupy less area and space. Plate heat exchangers with the same heat exchange area are only 1/5 of shell and tube heat exchangers.

Liaoning Tongda has strong technical strength, complete production equipment and testing methods, rich engineering experience, and honest after-sales service, which are deeply trusted and praised by the majority of users.

Liaoning Tongda Heat Exchange Equipment Manufacturing Co., Ltd. focuses on product quality and corporate reputation, as well as technological innovation and enterprise management. Currently, we have established cooperative relationships with numerous domestic enterprises and research institutes.

Long term supply of specialized plate heat exchangers for HVAC, stable quality of heating plate heat exchangers