Overview
| brand | Taiwan Li Changrong | encapsulation | Bagged |
| purpose | Sheet furniture, bottles, automotive industry containers | specifications | 25kg/bag |
| colour | transparent | Add logo | yes |
| Product name | PP | Processing level | Injection grade |
| Sales method | Brand distribution | Usage level | Sheet furniture, bottles, automotive industry containers |
| Processing method | injection molding | characteristic | Good heat aging resistance |
| Saleable land | nationwide | Grade | seven thousand six hundred and thirty-three |
| Packaging specifications | 25kg/bag | ||
Product Details
Application scope
Extrusion molding: pipes, plates, etc.
Injection molding: various containers and accessories, including food containers, household products, and home appliance shells.
Blister: Non washable tableware, including lunch boxes, bowls and plates, beverage cups, etc.
Thin film: Single polymer thin film is transparent and shiny, with low water vapor permeability, including blown film, cast film, and bi-directional extension film.
Drawing: Low flowability can produce flat yarn, high flowability can produce composite yarn, non-woven fabric, etc
Physical Property Table
| physical property | Test conditions | test method | test result | unit |
|---|---|---|---|---|
| Density/Specific Gravity | ASTMD792 | zero point eight nine six | G/cm ³ | |
| Melt mass flow rate | 230 ° C/2.16kg | ASTMD1238 | two | G/10min |
| Shrinkage rate | MD | ASTMD955 | one point four | % |
| Mechanical properties | Test conditions | test method | test result | unit |
| Tensile strength | yield | ASTMD638 | twenty-six point five | Mpa |
| Rockwell hardness | ASTM D785 | eighty-one | ||
| elongation | yield | ASTMD638 | seven | % |
| Bending modulus | ASTM D790/ISO 178 | thirteen thousand and one hundred | Kg/cm ² (MPa) [Lb/in ²] | |
| ASTMD790 | one thousand three hundred and twenty | Mpa | ||
| Thermal performance | Test conditions | test method | test result | unit |
| Thermal deformation temperature | ASTMD648 | ninety-two | ° C | |
| Impact performance | Test conditions | test method | test result | unit |
| Notch impact strength of suspended wall beam | 23 ° C | ASTMD256 | one hundred and eighty | J/m |
| Notched impact strength of cantilever beam | -18 ° C | ASTMD256 | one thousand and two hundred | J/m |
| Hardness | Test conditions | test method | test result | unit |
| Rockwell hardness | R-level | ASTMD785 | eighty-three | |
| Physical properties | Test conditions | test method | test result | unit |
| Specific gravity (density) | ASTM D792/ISO 1183 | zero point eight nine seven | ||
| Forming shrinkage rate | ASTM D955 | one point four | % | |
| Supplementary information | Test conditions | test method | test result | unit |
| DropWeightImpactStrength | -29 ° C | Internal methods | thirty-one point two | J |
Trading Area
Global