Guangdong rubber plastic insulation board, pipeline insulation material, B1 grade fire retardant rubber plastic, Guangdong Foshan sound-absorbing cotton, Golden Tower insulation material

Overview

brand	Golden Tower	Thermal conductivity	zero point zero three five
Bending rate	thirty	colour	black
type	Insulation board	type	Rubber and plastic products
Product level	B1	Low temperature bending	twenty-nine
Breaking elongation rate	zero point three six	application	insulation material
Sound absorbing and soundproofing materials		Pipeline insulation

Product Details

Rubber plastic insulation materials have been widely used in production and construction since the 1970s, among which rubber plastic insulation board is the most commonly used insulation material. Many problems have arisen during use. Today, let's summarize the precautions for using rubber plastic insulation board.

The precautions for using rubber plastic insulation board are as follows:

1. When rubber and plastic insulation materials enter the site, attention should be paid to protection to prevent damage to the insulation layer.

2. The interface and all gaps of the insulation material must be tightly bonded with rubber plastic adhesive, and there must be no loose or loose bonding.

3. When applying rubber plastic adhesive, it must be fully coated on the inside of the rubber plastic insulation material and the outer wall of the pipeline. When bonding insulation materials, the surface of the pipeline must be cleaned of debris, dust, and oil to ensure the bonding effect of the adhesive.

4. During summer insulation construction, the rubber plastic insulation board should not be pulled too tightly to prevent the insulation layer from contracting and opening when the temperature is too low in winter.

5. During insulation construction in winter, the indoor ambient temperature shall not be lower than 5 ℃, and the bonding effect is not good when the adhesive and tape are lower than 5 ℃.

6. Fire hydrant pipelines, sprinkler pipelines, and other fire water systems need to be insulated with rubber and plastic insulation. The thickness of the insulation material should comply with the construction drawing requirements, usually 60mm thick, with two layers of construction.

During the construction process of rubber plastic insulation board, it is necessary to pay attention to these details. Only after the construction is completed can it be aesthetically pleasing and ensure the insulation effect.