Photovoltaic triangular support manufacturer

The company always takes the market as a guide, continuously develops new products, adheres to the goal of high standards and precision manufacturing, and strives to create solar powered brackets. At present, the annual production volume has reached over 200000 sets. We always adhere to the principle of "cooperating with heart and doing with heart", always prioritizing the quality of our products and the interests of our customers. We strive to provide customers with more comprehensive services, and customer satisfaction is our great harvest! The industry standard NB/T10642-2021 "Technical Requirements for Photovoltaic Power Station Supports" was drafted with the participation of our company. This standard promotes the healthy and rapid development of photovoltaic power stations, standardization, and has evidence to rely on during the implementation process.

The column photovoltaic support system is a small energy-saving photovoltaic module system suitable for use in fields such as solar water pumps and traffic monitoring. The component specifications used in the pillar system are small to medium-sized, so the design of the pillar system is simple and the structure is precise. The column system uses stainless steel circular pipes as the main load-bearing members; The supporting components of this support system include columns, main frame beams, support beams, guide rails, guide rail connection blocks, angle adjustment rods, side pressure, medium pressure, etc; In addition, the column system is fastened by standard stainless steel screws with 2-3 types of screws, so only 2-3 types of tools are needed for installation. In order to facilitate the installation and use of our customers, the components of our column system configuration are highly pre assembled as a complete set of components before shipment. Once received, customers can directly install them without the need for additional secondary processing.

Photovoltaic car shed is a system that combines photovoltaic power generation with car shed. It can not only provide shelter for vehicles from wind and rain, but also use solar energy to create clean photovoltaic energy for electric vehicle charging, lighting, and integration into the power grid. The construction has almost no geographical restrictions, making it very flexible and convenient.

There are also various processing methods for photovoltaic brackets, among which the section steel is made of steel plates with different thicknesses. According to the design requirements, the steel is processed and formed in the factory. This forming method can be calculated based on the stress of different structural parts of the photovoltaic engineering project, and different thicknesses of steel plates are used in different parts. Compared to hot-rolled one-time formed products, the stress is more reasonable, more suitable for on-site installation, and can also save steel.

Solar photovoltaic brackets are often used in our daily lives. Below, we will introduce the general installation requirements of the Shenlong Bayer light steel photovoltaic brackets: the materials of the Shenlong Bayer light steel photovoltaic brackets are divided into main materials and auxiliary materials, and the main materials are the main raw materials, including steel plates, steel pipes, profiles, and cast steel; Auxiliary materials refer to raw materials, including connecting materials, coating materials, connecting fasteners, anti-corrosion coatings, etc.

The surface of the Shenlong Bayer light steel solar photovoltaic bracket must not have cracks, folds, lines, bubbles and inclusions, and the edges or fractures must not be layered. The photovoltaic bracket material must meet the requirements of corresponding standard documents.

The installation materials for photovoltaic brackets should have quality certificates, markings, inspection reports, etc., and the product variety, specifications, and performance indicators should be indicated. The product identification content should meet the requirements of product standards, contract terms, and design documents.

The maintenance personnel for the Shenlong Bayer light steel photovoltaic bracket need to have a maintenance team, usually consisting of 3-5 people per group. When encountering adverse weather, strong winds, and rainy weather, operations should be prohibited unless otherwise required. The homework team should promptly explain the problems encountered during the maintenance process, and if the problems have a serious impact, stop the work and keep a record of the problems.

The high-strength thin steel ground photovoltaic support system is a new type of ground photovoltaic support system developed by our company in June 2015. This photovoltaic support system has the advantages of anti-corrosion, rust resistance, aesthetics, and easy installation. It is suitable for the installation of small and medium-sized photovoltaic power generation systems on flat roofs or on the ground in schools, factories, office buildings, homes, and other areas. This bracket system consists of stainless steel base, stainless steel hinge joint, guide rail, guide rail connector, medium pressure, side pressure, aluminum square joint and other bracket accessories; All bracket accessories are equipped with high-strength screws before shipment from the factory, which facilitates quick installation on site and saves installation costs.