Surface AG treated non reflective photo frame with low reflective glass thickness of 1mm, 2mm, and 3mm

 Customized photo frame glass, non reflective 2mm anti reflective glass, AG glass processing manufacturer
 

Tempered glass: Tempered glass is a type of safety glass. Tempered glass is actually a type of pre-stressed glass. To improve the strength of glass, chemical or physical hardening treatment is usually used to form compressive stress on the surface of the glass. When the glass is subjected to external forces, it first offsets the surface stress, thereby improving its load-bearing capacity and enhancing its own resistance to wind pressure, heat and cold, and impact.

Features and advantages:
1. Compared to ordinary glass, it has several times higher strength and good bending resistance
2. Safe to use, its increased carrying capacity improves its fragility, and even if tempered glass is damaged, it appears as small shards without sharp angles, greatly reducing harm to the human body The resistance to rapid cooling and heating of tempered glass is more than 3-5 times higher than that of ordinary glass, and it can generally withstand temperature changes of over 250 degrees Celsius, which has a significant effect on preventing thermal cracking. It is a type of safety glass.
Safety: When glass is damaged by external forces, the fragments will form small obtuse angle particles resembling honeycomb shapes, which are less likely to cause harm to the human body.
High strength: the impact strength of tempered glass with the same thickness is more than 3-5 times that of ordinary glass, and the Flexural strength is more than 3-5 times that of ordinary glass.
Thermal stability: Tempered glass has good thermal stability, can withstand a temperature difference of more than three times that of ordinary glass, and can withstand a temperature difference change of 200 ℃.
Usage: Widely used in furniture, electronic appliances, and safety glass for decoration.
Thickness: 3-19mm
Mohs scale hardness: 7
Density: 2.5g/cm3
Transmittance: 91.5%
Origin: Dongguan
Purity: 80%
Heat resistance: long-term temperature above 300 degrees Celsius
Brand: Xupeng Glass
Melting point: 750 degrees
Color: Transparent
Sunshade coefficient: 0.56
Surface stress: 72N/Cm3
Performance: Transparent glass paint
Usage: Architecture, furniture, household appliances
English name: Tempered Glass

Customized photo frame glass, non reflective 2mm anti reflective glass, AG glass processing manufacturer

Anti glare (AG) refers to the impact of reflected light on our human vision. Anti glare glass, also known as non reflective glass or anti reflective glass, is different from ordinary glass

Compared to glass, it has a lower reflectance, with the reflectance of light decreasing from 8% to less than 1%. We all have this experience when looking at mobile phone screens, where it is difficult to see the screen clearly under sunlight,

And in the shade of trees or indoors, there is no problem, because under sunlight, the sunlight reflected by the phone screen glass is too strong, which enters our human eyes and seriously interferes with our vision

As a result, under the shade of trees, the light weakens and the reflected light greatly decreases, allowing us to see the screen clearly. Anti glare glass also improves the visual angle and brightness of the display screen, making the image

The role of clearer, more vibrant colors, and more saturated colors in significantly improving the display effect of the screen.

How to prevent glare? There are two methods:

(1) Enhanced transparency: refers to the use of surface treatment methods such as vacuum coating to allow as much light as possible to pass through or be absorbed by the glass, in order to significantly reduce the incidence of reflected light on the eyes

(2) Diffuse reflection: refers to the special processing of the glass surface to make the surface uneven, transforming the specular reflection of the original surface into diffuse reflection, allowing the reflected light to diverge on the glass surface

Instead of focusing on the reflection into our eyes, it can also help us see the screen clearly (as shown in Figure 3). The traditional processing method is to immerse the glass in hydrofluoric acid, perform etching, and

The mirror surface becomes rough, but this method causes significant environmental pollution and it is difficult to improve the product yield. There is another spraying method, which sprays a specially made liquid medicine onto the surface of the glass

After thermal curing, a diffuse reflective surface can be formed. This method is environmentally friendly and has a high yield rate.