Guangjiahuan manufacturer produces 1000 grams of ozone generator sterilization ozone sterilizer equipment

Introduction to Guangzhou Jiahuan Oxygen Source Ozone Generator

1、 Introduction to YT ozone generator:

The YT ozone generator can be used for sterilization in large-scale workshops in the pharmaceutical and food industry, water treatment sterilization, and deep sewage treatment;

The YT ozone generator adopts advanced high titanium enamel discharge tube technology;

YT ozone generator horizontal structure, beautiful and durable appearance;

The YT ozone generator adopts high-power imported IGBT modules and FPM control technology to drive the reliable operation of the ozone discharge chamber;

YT ozone generator water cooling can operate continuously for a long time;

YT ozone generator dual purpose air source and oxygen source;

The ozone production and concentration of the YT ozone generator are infinitely adjustable to meet different needs;

YT ozone generator saves electricity for high-frequency ozone generators.

2、 YT ozone generator parameters:

1000G parameters

3、 YT ozone generator gas source section

Air handling system

Qualified air source indicators after treatment with refrigeration dryer, adsorption dryer, oil-water separator, air filter, and air storage tank:

a. Water content: The dew point of the gas source is required to be lower than -40 ℃;

b. Oil content: The oil content is required to be less than 0.01mg/m3 (21 ℃), and can be less than 0.003mg/m3 (21 ℃);

c. Impurity particle size: Impurity particles should be less than 1 μ m. Better to be less than 0.01 μ M;

d. Temperature: The general requirement is that the temperature should not exceed 25 ℃;

e. Pressure: A certain pressure is required, usually above 0.1MPa, to ensure the stable operation of the ozone generator and meet the needs of subsequent ozone gas transportation and dosing.

3.1 Air compressor

The air compressor adopts WW type completely oil-free air compressor, with high air output efficiency, no need for lubricating oil, no oil in the air, low noise, and low operating costs.

3.2 Refrigerated dryer

A refrigerated dryer is a device that cools and condenses compressed air under saturated conditions to remove water. Under normal working conditions, it can remove about 80% of the moisture in the compressed air. The air source can reach an atmospheric dew point of around -40 ℃~-70 ℃, with a large amount of water removal and low energy consumption. It belongs to shallow water removal, and must be dried and cooperated to meet the requirements of ozone discharge.

The refrigeration dryer is composed of a fluorine compressor, a precooler, an evaporator, a heat exchanger, and a condenser, effectively ensuring that the air outlet pipeline does not condense or drip during operation.

3.3 Adsorption dryer

Using advanced chemical technology, the principle is to use the difference between water content and air molecular volume in saturated compressed air. A gas purification dedicated molecular sieve is used to filter out saturated water vapor in compressed air, which can easily adsorb water molecules into the molecular sieve particles. Then, regeneration methods are used to reduce the molecular sieve, and the compressed air point can easily reach -40%

3.4 Air filter

Generally, a graded approach is adopted, including main pipeline filtration, oil removal filtration, dust removal filtration, etc., to ensure that the oil content of the gas source entering the adsorption dryer is less than 0.01mg/m3, and to ensure that the particle size of the gas source dust entering the ozone generator is less than 0.01 μ M.

3.5 Oil water separator

By installing a water separator, liquid water above 99% can be removed. Your air compression system will operate better, with fewer downtime and reduced maintenance costs.

3.6 Air storage tank

After installing the air compressor in the air storage tank, compressed air cannot be stored, reducing the pressure pulsation caused by the discontinuous discharge of the compressor, achieving a balance between supply and consumption of gas, and reducing the temperature of compressed air, reducing the load on the filter and desiccant.

4、 Cooling water system

The heat generated by the ozone generator needs to be released, which is achieved by cooling water flowing through the outer wall of the discharge body. The dual gap inertness used in any ozone generator is quite sensitive to chloride ion corrosion, especially when the concentration of chloride ions is high. The corrosion ability is based on water temperature and pH value, and the higher the water temperature, the lower the pH, and the faster the corrosion.

Advanced water cooling technology ensures that the temperature generated by ozone is relatively constant and not affected by changes in room temperature, solving the problem of ozone generation being affected by seasonal changes and ensuring stable production.

The cooling water source is provided by the user and meets the following conditions: cooling water pressure 0.2Mpa, temperature<35 ℃, pH value 6.5-8, chlorine content (average) ≤ 100mg/l, chlorine content (peak) 150mg/l, suspended solids ≤ 10mg/l. If the cold water temperature provided by the user cannot meet this design requirement, a cooling water circulation system can be designed to meet the requirements of ozone operation.

5、 PLC automation control system (optional)

PLC automation control, with powerful instructions and superior performance, compact design, suitable for various automation control needs of enterprises.

The equipment adopts a PLC control system to achieve multi-point online monitoring of various parameters such as water, electricity, and gas, and to protect the equipment. The PLC has a remote monitoring interface, which can achieve functions such as remote on/off and remote status display.

The PLC monitoring and control system can be set to provide timely feedback to the PLC when the water temperature is too high, the water level is insufficient, the water flow is cut off, the air pressure is insufficient, or the variable frequency inverter power supply malfunctions, thereby controlling the entire control circuit to be cut off or giving an alarm.

Performance characteristics: a) High speed and stability; b) High reliability; c) Strong communication ability

Ozone sterilization mechanism:

Ozone destroys the structure of microbial membranes through the oxidation of oxygen atoms to achieve bactericidal effects. The inactivation reaction of ozone on bacteria is always very rapid. Unlike other fungicides, the double bond reaction between ozone and bacterial cell wall lipids penetrates into the interior of the bacterial body, acting on proteins and lipopolysaccharides, changing the permeability of cells and leading to bacterial death. Ozone also acts on nuclear substances within cells, such as purines and pyrimidines in nucleic acids, which damage DNA. Ozone first acts on the cell membrane, causing damage to its constituent components, leading to metabolic disorders. Ozone continues to penetrate the membrane, damaging the membrane's lipoproteins and lipopolysaccharides and altering cell permeability, leading to cell lysis and death.

Guangzhou Jiahuan Electrical Technology Co., Ltd. is a professional production and processing company specializing in ozone generators, ozone accessories, oxygen generators, ozone water machines, ozone disinfection cabinets, and other products. It has a complete and scientific quality management system. Guangzhou Jiahuan Electrical Technology Co., Ltd. has gained recognition from the industry for its integrity, strength, and product quality. Welcome friends from all walks of life to visit, guide, and negotiate business.Existing HY/YT Jiahuan brand series:Small ozone generator seriesOZ air-cooled ozone generator series
Air cooled ozone generator seriesWater cooled ozone generator seriesAir-cooled ozone oxygen integrated generator seriesPure oxygen generator series.
Our company is a professional company engaged in ozone technology research, development, ozone system design, manufacturing, and services. We are a legitimate manufacturer of ozone disinfection machines, ozone generators, small ozone generators, air purifiers, oxygen generators, and fruit and vegetable detoxification machines. In * drinking water treatment, * reclaimed water reuse treatment, * cosmetic container disinfection and sterilization, * aquaculture oxygenation disinfection and sterilization, * poultry breeding industry, * swimming pool water disinfection and sterilization, * aseptic workshop, * pharmaceutical and food factory disinfection and sterilization, * GMP certification, * food preservation and storage, * fruit and vegetable agricultural degradation *I have rich experience in sewage treatment (advanced treatment of industrial sewage such as hospitals, food factories, electroplating factories, and urban sewage) * deodorization treatment of industrial waste gas.The company closely combines market demand, takes ozone technology as the core, meets customer needs, and is committed to the development and application of technologies such as ozone.