Guangjia Ring Honeycomb Large Horizontal Kilograms Wide Plus Ring Ozone Generator Complete Set Ozone Machine YT-030X

Guangjia Ring Horizontal Honeycomb Ozone Machine 3KG/H Ozone Generator YT-030X

1、 Composition of ozone system
The ozone system mainly consists of an ozone generator, a gas source system, and a control system. The ozone generator includes an ozone generating device
(Ozone discharge chamber) and ozone power supply device; The air source system includes air compressors, refrigeration dryers, adsorption dryers, air filters, etc; Peripheral equipment such as ozone concentration detection devices can be equipped according to the needs of the demander.

2、 Requirements for the use of ozone generators
The air treatment system consists of an air compressor, a refrigerated dryer, an adsorption dryer or oxygen generator, an oil-water separator, and an air filter
The filter composition provides a qualified air source for the ozone generator. The air compressor adopts a screw type air compressor, which has high output efficiency, low noise, and low operating costs. The air storage tank is used to pre store and buffer the compressed air provided by the air compressor, and keep the pressure and flow rate of the compressed air constant, ensuring the use conditions of downstream purification equipment. Freezing dryer is a type of dryer that
Under normal working conditions, compressed air cooling and condensation can remove about 80% of the water in the compressed air. The water removal amount is large, and the energy consumption is low. It belongs to shallow water removal, and must be dried and cooperated to meet the ozone discharge requirements. Adsorption dryer is a dehumidification and purification device that uses the principle of pressure swing adsorption and the method of heat free regeneration to dry compressed air. It belongs to the category of deep water removal and gas source
It can reach an atmospheric dew point of around -50 ℃. The filter includes main pipeline filtration, oil removal filtration, dust removal filtration, etc. to ensure that it enters the adsorption process
The oil content of the air source of the air dryer is less than 0.01mg/m3, ensuring that the particle size of the dust entering the ozone generator is less than 1 μ M
Even 0.01 μ M.

3、 Technical specifications of ozone machine
The control system is connected to an industrial control level computer using a PLC. The ozone generator adopts internationally advanced intermediate frequency discharge technology, and is internally controlled by a CPU core. Soft start and soft unload functions are designed, and the ozone generator can be smoothly and linearly adjusted
Add power to achieve 10% -100% regulation of ozone production, minimizing the operating costs of the demand side.
An ozone leakage alarm device is installed in the ozone preparation room. When the ozone leakage in the environment of the preparation room exceeds the standard, the system determines to output an alarm, start the exhaust fan, or shut down based on the detection signal.

4、 Requirements for the use of ozone machines
4.1 Temperature: minimum temperature -10 ℃, maximum temperature 40 ℃.
4.2 Humidity: The minimum relative humidity is 70%, and the maximum relative humidity is 90%.
4.3 Atmospheric pressure: Annual average pressure 101.59 kPa.
4.4 Cooling water: The demander shall provide qualified external circulating cooling water source to the plate exchange water outlet, meeting the following requirements: pressure ≥ 0.2MPa, temperature ≤ 28 ℃,
The water supply is subject to the parameters, with suspended solids ≤ 5mg/L and COD ≤ 50mg/L; And provide an internal circulating cooling water source (distilled water or pure water) to fill the closed loop system. The demander shall provide their own make-up water pump.
4.2.2 Design conditions
The ozone generator is designed according to indoor installation requirements, and the user should ensure that the equipment operates within the design conditions.
4.2.2.1 Temperature: The design ambient temperature range of the ozone generator is 0-40 ℃.
4.2.2.2 Humidity: The designed relative humidity of the ozone generator is less than 90%.
4.2.2.3 Cooling water temperature: Provide sufficient qualified cooling water with a temperature of ≤ 28 ℃.
4.2.2.4 Atmospheric pressure: The ozone generator is designed according to standard atmospheric pressure, which is 101.3KPa. Changes in atmospheric pressure on odor
The normal operation of the oxygen generator has little impact, but when using the ozone generator in high-altitude areas, attention should be paid to pressure correction for the impact of atmospheric pressure changes on ozone concentration detection.
4.2.2.5 Air source conditions: The air source of the ozone generator is air, and the dew point of the air source is required to be less than -50 ℃.
4.2.2.6 Power supply conditions: 380V/3ph/50Hz
4.2.2.7 Work system: 12 hours of continuous operation, 365 days/year.
4.2.2.8 Equipment installation location: ozone generation room.

5、 Services
1. Equipment warranty period
The equipment warranty period is one year from the date of delivery, with lifelong maintenance;
① Operators are proficient in operating equipment;
② Maintenance personnel need to master the daily maintenance and repair work of the equipment.
2. Troubleshooting
① After receiving a service call and receiving information about a malfunction in the user's equipment, provide a clear response to the user on the same day; Maintain equipment to ensure normal user use.
3. Other services
① Establish user computer files and have dedicated software to assist users in device management;
② Regularly remind users to replace vulnerable parts, inspect equipment and precautions.
4. Quality Commitment:
① The provided equipment meets the requirements for your company's use, while ensuring that the equipment meets the quality indicators of the provided technical documents
Ensure the safety, reliability, and stability of the equipment.
② The supplier guarantees to the buyer that if the equipment malfunctions due to defects in design and manufacturing, as well as defects in materials, the supplier will repair and replace the damaged parts for the buyer free of charge, with a warranty period of one year from the date of equipment delivery.
③ Under normal usage, the service life of the entire equipment is 6-8 years.
④ The supply of accessories is not affected by equipment modifications, and the equipment accessories are provided to users at the most favorable price for life beyond the shelf life. If one of the following situations occurs during the warranty period, it is not within the scope of free maintenance:
A. Excessive humidity in the environment or water ingress into the machine structure resulting in product loss
B. Unauthorized modification of product structure resulting in product damage
C. Product damage caused by natural disasters or other force majeure
D. The machine malfunctioned due to improper operation.

6、 Company Introduction
Guangzhou Jiahuan Electrical Technology Co., Ltd. is a professional manufacturer of ozone generators; Established in 2007, located in Guangzhou, Guangdong Province. Manufacturing and supplying ozone generators, water treatment ozone generators, air purifier ozone generators, large-scale industrial ozone generators, car air purifier ozone generators, ozone disinfection cabinets, PSA oxygen generators of different capacities. Widely used in wastewater treatment, drinking water treatment, swimming pool water treatment, aquaculture, agriculture, poultry, pharmaceutical workshops, food workshops, sterile workshops, jeans bleaching, homes, schools, hotels, offices, cars, etc. Good quality and service are our culture. Welcome to inquire by phone