Manufacturer of long optical communication GJXFH-2B6A2 optical fiber 8-shaped butterfly inlet optical cable and cable sheath

The optical cable contains 1-4 coated silica based optical fibers, which can be classified as ITU-T G.657A (C1) or G.652D (B1.3). The same batch of products should use optical fibers of the same design, material, and process, and the optical fibers should be placed in the center of the optical cable. The optical fiber coating layer can be colored, and the color of the colored layer should be blue, orange, green, brown, and single fiber according to GB 6995.2. The coating structure, fiber strength screening level, mode field diameter and size parameters, cut-off wavelength and bending loss of single-mode optical fiber used for cabling shall comply with the provisions in Table 1, 2 and 3 below. The reinforcing components in optical cables can be metal reinforced components of high-strength stainless steel wire or phosphating steel wire, as well as non-metallic reinforced components of polyester aramid wire or other suitable fiber bundles, which should have sufficient Young's modulus and elastic strain range. The strengthening components of the optical cable should be 2 pieces, parallel and symmetrical in the optical cable. There should be a thick steel wire suspension wire on the side.

Technical parameters

Characteristics:

The fiber optic cable has a simple structure and special bending resistant fiber optic, providing greater bandwidth and enhancing network transmission characteristics. Unique groove design, lightweight, easy to peel off, and easy to connect. Self supporting steel wire or stranded steel rope, with two parallel non-metallic FRP reinforcement elements placed on both sides.