Overview
Product Details
PA6 GF 45% polyamide 6 PA plastic Nylon6 cf10% , gf45% , gf35 , gf45 granules PA6 GF30
Specifications:
1. 10%-50%cf filled
2. Antistatic3. Good mechanical properties
4. Size stability
5. High toughness6. Good abrasion property, weatherability
7. Reduce water absorption
8. Long-term work at higher temper
Product Description:
Engineering Nylon: PA66, PA6 Plastic granules
For our Reinforced Nylon series, it avaliable for PA66 or PA6 with glass fiber range from 10% to 60%, for PA66 or PA6 with carbon fiber range from 10%-50%.
It has outstanding mechanical strength and good toughness;
It with high heat resistance performance, and good dimensional stability;
It has high flexibility performance in the low temperature: Minus 40 degrees Celsius condition;
For flame retardant propert, it reach V0 standard;
It has high CTI value , excellent electrical insulation, low smoke and low toxicity characteristics.
Advantages for PA6 gf:
Mechanical property, dimension stability, heat resistance and ageing resistance is obviously improved; Fatigue resistance is 2.5 times as the normal polyamide PA6.
Applications for PA6 gf:
Inlet manifold of automobile engine, radiator tank parts, motor cover, tire cover, tension wheel, cooling fan, jetting machine accessories, electronics, connection terminal, disconnector, bearing cage, power tools cover, high performance gear, coil skeleton, textile accessories and so on.
Company Information:
Xiamen Keyuan Plastic Co., Ltd is specialized in:
glass fiber reinforced/ carbon fiber reinforced/ flame retardant/ toughen/ wear resistant/ heat resistant/ cold resistant/ other modified PA6/PA66/PP/PC/ABS/PBT/POM/PPS/PEI/PES plastic raw material, which are widely used to produce:
auto plastic parts, polymer fan, fuel filter, auto radiator, sensor
power tools plastic housing, plastic enclosure, plastic case
plastic electrical parts, switch, electrical connector, plastic bobbin
plastic furniture, plastic chair, plastic toy, nylon caster
Product Description | Glass Fiber Reinforced PA6 Material |
Product Grade | Injection Molding Grade |
Appearance | Natural Pellet |
Item | Typical Characteristic | Typical Characteristic | Testing Standard |
Density | 1.35g/cm3 | 1.39g/cm3 | ASTM D-792 |
Glass Fiber | 33% | 45% | --- |
Molding Shrinkage | 0.3% | 0.25% | ASTM D-955 |
Tensile Strength | 140MPa | 150MPa | ASTM D-638 |
Elongation at break | 3% | 2.5% | ASTM D-638 |
Flexural Strength | 205MPa | 215MPa | ASTM D-790 |
Flexural Modulus | 6900MPa | 7600MPa | ASTM D-790 |
Heat Deflection Temperature | 210℃ | 218℃ | ASTM D-648 |
Flame Retardant | HB | HB |