Microbial limit detector L009 WHXD-3A six way limit detector stainless steel multiple way filter

Product Description

The stainless steel multiple filter, based on the principle of membrane filtration method, is used together with the Microbiological culture (M50). Through the suction filtration of the liquid pump, a negative pressure is formed inside the system. The test article is filtered under the effect of differential pressure, and possible microorganisms are trapped by the filter membrane. The antibacterial ingredients are removed by washing the filter membrane (if necessary), and then the culture medium is poured back. The bacterial content of the test article has been checked. Mainly used for microbial detection in various media such as water quality, drugs, and food, as well as for sterilization and particle removal in the laboratory. It has the characteristics of being less prone to contamination during operation and easy to clean.

Scope of use:

Pharmaceuticals: purified water, injection water, ophthalmic preparations, raw materials, capsules, biological products, tablets, oral preparations;

Food: purified water, mineral water, beverages;

Chemical engineering: various microbial water samples to be tested;

Cosmetics: various water and products;

Disease control: rivers, lakes, seas, and water samples.

Product features:

1. The filter cup adopts a unique lip shaped sealing design, without the use of clamps and O-rings, ensuring leak free operation and uniform microbial recovery rate;

2. Pre sterilization of the filter membrane, which is easy to disassemble and use, can minimize the main source of pollutants and improve detection reliability;

3. Direct suction filtration and drainage, easy to install and use;

4. The compact body reduces the occupation of the operating platform area;

5. The waterproof switch is simple and convenient;

6. The design of six filter heads allows for simultaneous filtration, improving work efficiency. Each filter head can also be independently controlled, making it convenient for operators to use flexibly;

7. The filter head can be quickly disassembled and sterilized separately by damp heat;

8. The filter head can be quickly sterilized by flame, facilitating continuous experimental operations;

9. Adopting a single sided circular arc filter for easy replacement;

10. The surface of the instrument is treated with a mirror for easy cleaning and disinfection;

11. The filter cup is designed with reusable materials, which is durable, cost-effective, and easy to operate.

Technical parameters:

1. Applicable filter membrane diameter: 47mm/50mm;

2. Effective filtration diameter: 40mm;

3. Number of filter heads: 1-6;

4. Detection method: membrane filtration method;

5. Suction filtration method: vacuum pump negative pressure suction filtration, gas cylinder needs to be pumped;

6. Sterilization method for filter head: moist heat sterilization, flame rapid sterilization;

7. Size: 74 * 8 * 18cm (length * width * height);

8. Weight: 4kg;

9. You can choose between single head and six head structures, with a wide selection of options.

Microbial limit detector L009 WHXD-3A six way limit detector stainless steel multiple way filter