Overview
| brand | Fluorine resistant | Does it support processing customization | yes |
| Imported or not | no | Pump shaft position | |
| material quality | F46 | Applicable vehicle series | |
| size | Inflatable tube length | ||
| Pumping capacity | Pumping rate | ||
| current | voltage | three hundred and eighty | |
| Power cord length | Power supply type | ||
| Air volume | Working fluid | ||
| working temperature | one hundred | working pressure | |
| Working steam consumption | Working steam pressure | ||
| power | one thousand and one hundred | function | Strong acid and alkali resistance without leakage |
| specifications | series | two | |
| Ultimate pressure | Net weight | one hundred and fifty | |
| style | category | ||
| type | Leakage free magnetic pump | flow | four hundred |
| Discharge caliber | NPSH | ||
| Driving method | motor drive | Applicable scope | Suitable for transporting strong acids, alkalis, organic solvents, flammable and explosive liquids, rare and precious liquids, etc. |
| Transport medium | Strong acid, strong alkali, strong corrosive liquid, flammable and explosive liquid | temperature range | one hundred and fifty |
| Suction caliber | two hundred | Suction pressure | |
| Box quantity | one | efficiency | sixty |
| model | IMD200-150-315FT | performance | |
| colour | blue | lift | thirty-two |
| impeller | three hundred and fifteen | principle | Magnetic coupling operation |
| vacuum degree | Direct connected motor | ||
| weight | one thousand and eighty | speed | two thousand and nine hundred |
| Maximum working pressure | one point six | ||
Product Details
Product Introduction: IMD-FT fluoroplastic alloy magnetic pump, with flow components made of fluoroplastic and alloy composite materials, applies magnetic mechanics principles and utilizes internal and external permanent magnet transmission to achieve contactless torque transmission. When the motor drives the outer rotor assembly to rotate, the magnetic field passes through the isolation sleeve to drive the inner rotor assembly and impeller to rotate synchronously. When the outer rotor rotates, the isolation sleeve is stationary, and the isolation sleeve completely seals the medium, So as to achieve the goal of leak free transmission of media. Thoroughly solved the problem of shaft seal leakage, leakage, and dripping in mechanical transmission pumps.
Application scope: Suitable for transporting strong acids, alkalis, organic solvents, flammable and explosive liquids, rare and precious liquids, etc.
Working temperature: -20 ℃~100 ℃, customized for temperatures above 100 ℃, with a maximum temperature resistance of ≤ 160 ℃.
Design features: IMC magnetic pump is an upgraded product of CQB magnetic pump, adopting a fixed shaft design. The impeller and internal magnet are integrated in a structure, and are supported on a fixed shaft as a whole. Compared to traditional rotating shafts, the strength of the fixed shaft is significantly improved. The main shaft, bearings, and other grinding components are made of silicon carbide or pressureless silicon carbide, which forms a liquid film between the grinding components during operation, greatly improving their service life. The reinforcement sleeve is made of Polyether ether ketone, reinforced carbon fiber and other non-metallic materials, which eliminates the damage of the isolation sleeve caused by magnetic vortex heating. Both the internal and external magnets are Rare-earth magnet. Under normal operating conditions, the magnetism will not age and demagnetize over time.
