Side mounted Level sensor_ Liquid level transmitter_ Price of liquid level controller_ Shenzhen liquid level sensor

BLT type Level sensor, visible outer tube Level sensor

Product description: BLT type Level sensor, visible outer tube Level sensor is connected with the measured liquid through bypass side mounting or top mounting, and the magnetic unit is placed inside the float or connected with the float through the ejector rod. The magnetic unit changes with the liquid level to make the liquid level switch operate in a corresponding manner; At the same time, the liquid level sensor outputs a 4-20mA current signal under the action of the magnetic unit of the floating ball, and sends the intelligent meter head to control the output alarm contact.

characteristic

1. Suitable for liquid level measurement of various media
2. LED display of liquid level, intelligent menu operation
3. High strength transparent PVC pipe, fully sealed structure, not easy to leak
4. Integrating on-site display, remote transmission, and alarm control
5. Reliable output and strong anti-interference ability

operational principle

Connect the magnetic unit to the measured liquid through bypass side or top mounting, and place it inside the floating ball. The magnetic unit changes with the liquid level, causing the liquid level switch to activate accordingly; At the same time, the liquid level sensor outputs a 4-20mA current signal under the action of the magnetic unit of the floating ball, and sends the intelligent meter head to control the output alarm contact

Technical parameters:

1. Suitable for liquid level measurement of various media.

2. LED display of liquid level, intelligent menu operation.

3. High strength transparent PVC pipe, fully sealed structure.

4. Integrating on-site display, remote transmission, and alarm control.

5. Reliable output and strong anti-interference ability.

Knowledge extension:

Introduction to the main application fields of liquid level transmitters

A liquid level transmitter is a pressure sensor component used to prevent the medium in the pipeline from directly entering the transmitter. It is connected to the transmitter by a capillary filled with fluid. The liquid level transmitter is used to measure the liquid level, flow rate, and pressure of liquids, gases, or vapors, and then convert it into a 4-20mA DC signal output.

Simulate the "online operation" assessment one by one to ensure that the level transmitter can work stably and reliably under the limit ambient temperature, medium temperature and working pressure (including positive pressure or vacuum). The liquid level transmitter adopts a "dynamic surface" remote transmission diaphragm structure, and the diaphragm will not be damaged after overload; The accuracy will not change after long-term operation. The liquid level transmitter adopts a filling system with full fusion welding and rigid sealing structure, which eliminates the occurrence of oil leakage. A novel capillary bonding component is designed to provide reliable protection for the capillary and prevent it from breaking during on-site use. Liquid level transmitters can provide various special needs products, including high temperature, high vacuum, fast response, and remote differential pressure transmitters with unequal length capillary tubes (difference ≤ 4.5 meters). The variety, form, and size of remote transmission devices, as well as the rich variety of filling fluids, can meet the measurement needs of various occasions.

Liquid level transmitters are mainly used for measurement in the following situations:

Viscous medium under high temperature;

Medium that is easy to crystallize;

Sedimentary media with solid particles or suspended solids;

Strong corrosive or highly toxic media;

The liquid level transmitter is suitable for eliminating the occurrence of pressure pipe leakage and polluting the surrounding environment; It can avoid the tedious work of frequently supplementing isolation fluid due to the unstable measurement signal when using isolation fluid;

Continuous measurement of interface and density;

The remote transmission device can avoid the mixing of different instantaneous media, so that the measurement results truly reflect the actual situation of process changes;

The liquid level transmitter is suitable for occasions with high hygiene and cleanliness requirements;

In the production of food, beverage, and pharmaceutical industries, it is not only required that the contact area of the liquid level transmitter with the medium comply with hygiene standards, but also be easy to flush to prevent cross contamination of different batches of medium.