Overview
| brand | Xiangyuan | Measuring cylinder material | 304SS, 316L, PVC, PP, stainless steel lined with PTFE |
| Protection level | IP65 | Pressure level | 1.6MPa |
| resolving power | 5mm | model | UFZ-52 |
| measuring range | 0-6000mm (extra long special customization) | Processing customization | yes |
| measurement accuracy | 10mm | Application scope | Petroleum, chemical, power, municipal, environmental protection, etc |
| signal output | 4mA~20mA | Measurement tube material | Stainless steel |
Product Details
Overview of top mounted magnetic float level gauge UFZ-52:
The top mounted magnetic flap level gauge is directly installed on the top of the container, and the magnetic connecting rod is driven up and down by the floating ball as the liquid level (or interface) moves up and down. The magnetic steel inside the magnetic connecting rod uses the principle of magnetic coupling to drive the magnetic flap indicator. The liquid level or boundary in the process container is clearly and intuitively indicated in red and blue (liquid red, gas, and blue), which can be remotely transmitted and automatically controlled. The top mounted magnetic flap level gauge mainly consists of several parts, including the main body, local indicator, remote transmitter, and upper and lower limit alarms.
Features of top mounted magnetic float level gauge UFZ-52:
According to the principle of buoyancy in the liquid level gauge, the float moves up and down in the measuring tube as the liquid level rises and falls. The permanent magnetic steel inside the float drives the red and white flip columns to flip 180 degrees through magnetic coupling. When the liquid level rises, the flipping column changes from white to red, and when it drops, it changes from red to white to achieve liquid level indication.
The upper and lower limit switch outputs use a magnetic float to move with the liquid level, causing the reed switch installed at the set position of the liquid level gauge riser to operate, achieving ON-OFF control or alarm.
Install a transmitter on the magnetic float level gauge for remote transmission. The transmitter consists of two parts: a sensor and a converter. It moves up and down through a magnetic float, and through magnetic coupling, the measuring components inside the conduit move in sequence to obtain resistance signal changes, which are converted into standard current signals of 0-10mA or 4-20mA for output, in order to connect with digital display instruments or computers and achieve remote display.