PM610H Yiming LED driver power supply startup input and output parameters comprehensive performance tester

1、 Overview level features

The PM610H LED driver power comprehensive performance tester meets the testing requirements for the electrical performance of LED lamps in domestic and international standards such as GB/24825-2009 and IEC62384:2006. It meets the limitations of IEC61000-3:2020 and EN61000-3-2, and can test DF. According to the requirements for harmonics and phase angles in IEC61000-3:2020, the qualification judgment is made and a test report is provided. It has a series of advantages such as high intelligence, convenient use, good stability, and high accuracy, and is a new generation of intelligent instruments. And it has the following characteristics:

1. The instrument displays input and output characteristics parameters in eight windows simultaneously, with intuitive readings. Easy to analyze and compare, very suitable for technical development and also suitable for on-site production testing.

2. Standard harmonic testing function: Supports IEC61000-4-7 harmonic measurement, can analyze the harmonic content in the signal, and can display harmonic measurement results up to 50 times.

3. The input and output current test frequency response is 1MHz, which can accurately measure various LED driving power supplies:

4. Adopting high-speed MCU and high-precision A/D for control and measurement, with high accuracy

5. The measured signal values are all true RMS, which is also applicable to signals with waveform distortion.

6. Fast testing, real-time display of current electrical parameters.

7. Equipped with RS232/RS485 (optional) communication function, the instrument can be remotely operated, controlled, and read corresponding data using dedicated software provided on the upper computer. All measurement data and waveforms can be displayed on a PC, with a beautiful interface and easy operation.

2、 Technical indicators

1. Input characteristic AC test

Measure input voltage (V), current (I), power (P), power factor (PF), displacement factor (DF), grid frequency (HZ), total harmonic components of 0-50 times, starting phase angle, peak phase angle, cut-off phase angle, etc;

Voltage and current fundamental frequency range: 45Hz~65Hz;

Signal narrow frequency range: 45Hz~5KHz, signal wide frequency range: 45Hz~1MHz;

Voltage range: 1V~300V (CF=1.67);

Current range: 5mA~2.7A (CF=3);

Power range: 0.15W~800W;

Power factor range: 0.000~± 1.000;

Phase shift factor range: 0.000~± 1.000;

Phase angle: The phase angle between the fundamental voltage and the current.

2. Input characteristic DC test

Measure input voltage, current, and power;

Voltage range: 1V~500V;

Current range: 5mA~8A;

Power range: 0.15W~4000W;

3. Output characteristic AC test

Measure the output lamp voltage, lamp current, and lamp power;

Voltage range: 1V~300V (CF=3);

Current range: 5mA~2.7A (CF=3);

Power range: 0.15W~800W;

Power factor range: 0.000~± 1.000;

Phase shift factor range: 0.000~± 1.000;

Phase angle: The phase angle between the fundamental voltage and the current.

4. Output characteristic DC test

Measure lamp voltage, lamp current, lamp power, and ripple current;

Voltage range: 3V~500V;

Current range: 5mA~8A;

Power range: 0.15W~4000W;

Ripple current range: 5mA~2.5A;

5. Output startup characteristic test

Measure the change curve and data of lamp voltage and lamp current within 0-2 seconds;

Lamp voltage range: 3V~500V;

Lamp current range: 5mA~8A;

3、 Test report