Overview
| hardness | Very strong | material quality | Steel |
| style | modern | colour | white |
| brand | Xilang SEPPES | Water tightness | IP54 |
| Processing customization | yes | compressive strength | Levels 8-10 |
| Quality level | A | Special Purpose | Electric sandwich steel insulation |
| Foreign trade or not | yes | Production process | casting |
| Safety level | A | Scope of use | Large factory buildings |
| Product category | Liftgate | Pendulum impact amount | |
| Wind pressure resistance performance | Levels 8-10 | Bending modulus of elasticity | |
| Door frame plate thickness | Tensile yield strength | ||
| Maximum size of door frame | |||
Product Details
Zibo Large Factory Electric Sandwich Steel Insulation Industrial Lift Door
The segmented industrial lifting door is suitable for large openings in industrial factories. The normal door body is composed of two or three door panels, and the balance method adopts counterweight balance. Each door panel has two independent steel wire ropes for lifting; Multiple door panels are linked, and multiple lifting ropes are safety ropes for each other.
The segmented lifting door, like a conventional lifting door, has a protective device and a safety emergency switch.
1. The anti breaking device of the steel wire rope can ensure that in the event of accidental breakage of the steel wire rope, the door panel will not fall down, ensuring that the device directly catches the steel wire rope.
2. There is a safety sensing edge at the bottom of the door panel. When there is an obstacle below the door when it is closed, the door will automatically return to the open position.
3. Anti small door opening device: When the small door of the pedestrian passage is opened, the motor is in a power off state and the door cannot operate.
The opening speed of segmented industrial lift doors is between 0.25 and 0.35m/s, suitable for temperature ranges of -10 º C to+80 º C. The door panels are made of polyurethane foam sandwich panels, with a width of 50mm and a thickness of 40mm. Polyurethane core material density ≥ 48kg/m3, flame retardant performance: B2 level. The exterior decoration and edges of the gate are made of aluminum alloy material, with flat welding and docking between the edges. The weld seam is ground flat and polished, and the exterior is sprayed with gray fluorocarbon metal paint. The paint film thickness is 60mm, and the nominal thickness of the substrate is 2.0mm.
The segmented industrial lift door of Xilang SEPPES adopts the German imported brand FROG PUPIL. The motor is equipped with a control system, clutch system, and transmission system, with a slow start and stop function, which can effectively prevent wire rope chaos. The control of segmented industrial lift doors has a display screen that can effectively display the number of runs and fault codes.
