Overview
| brand | Tengyue | Fan pressure | |
| Scope of use | Chemical electroplating and oxidation power plants, etc | Does it support processing customization | yes |
| Whether to transfer the page fan | Airflow direction | centrifugal | |
| type | Installation distance | ||
| material quality | Carbon steel, stainless steel. | Operating temperature range | |
| current | voltage | 380V | |
| Power supply mode | Rated voltage | ||
| Rated power | Rated cooling capacity | ||
| Rated heating capacity | Rated frequency | ||
| Air volume | 6677m ³/ H | Wind turbine diameter | |
| Fan type | wind speed | ||
| Blade diameter | power | forty-five | |
| Fuselage Length | Machine weight | one thousand and one hundred | |
| Noise reduction effect | cut-off frequency | ||
| compressive strength | Air conditioning fan type | ||
| control type | Effective range of ion wind zone | ||
| Ion equilibrium | Is it temperature resistant | ||
| Energy efficiency level | Operating temperature | ||
| Applicable scope | Applicable fan | ||
| Applicable fields | Water tank capacity | ||
| Overall dimensions | Temperature range | ||
| Sound absorption coefficient | Power consumption time | ||
| Power consumption efficiency | Silencing frequency | ||
| Types of noise reduction equipment | model | ||
| performance | colour | ||
| Number of blades | noise | ||
| noise | low | weight | one thousand and one hundred |
| Main materials | speed | 1400r/min | |
| purpose | boiler | Processing customization | yes |
| pressure | 2019Pa | producing area | Zibo, Shandong |
Product Details
Maintenance of anti-corrosion fan:
1. The fan must be used and repaired by dedicated personnel.
2. The fan is not allowed to operate with faults.
3. Regularly clean the dust inside the fan, especially impurities such as dust and dirt on the impeller, to prevent rust and imbalance.
4. Fan maintenance must emphasize the first step of power outage and shutdown.
5. Regularly lubricate the front and rear bearings of the generator, and maintain the front and rear bearings every six months or one year. During maintenance, remove the generator and gently pry open the front and rear end covers with a screwdriver. Be careful not to rotate or forcefully open them to avoid damaging the internal wiring or rectifier components of the generator. After removing the front and rear end covers, clean them with gasoline, reapply lubricating oil (calcium based grease), and reinstall them in their original positions according to the requirements of the front and rear end covers.
6. The snail of the fan should not accumulate oil or too much water. Regularly clean the fan wheel and the inside of the body to avoid affecting the normal operation of the fan.
