Ed121/12 electric hydraulic thruster

Ed series electric hydraulic thrusters

Usage conditions:

Environmental temperature: DB-25 hydraulic oil should be used between -20 ℃ and 50 ℃, and YH-10 aviation hydraulic oil should be used below -20 ℃. A heater may not be installed; When using DB-25 hydraulic oil, a heater must be installed. Continuous operation S1, intermittent operation S3-60%.

Voltage and frequency: three-phase AC 380V/50 (60) Hz. Our company can also provide other products with different frequencies and voltages. Please negotiate and place an order if needed.

The three-phase AC asynchronous motor complies with the regulations of G8755-2000, and its performance is detailed in the technical data. Insulation level: F level, electrical protection level: IP65.

Cable: The maximum cross-sectional area of the wire can reach 4X2.5mm ²。

Efficient anti-corrosion products: used in situations where there are corrosive media and high relative humidity in the air, which may generate condensation. The motor adopts a vacuum injection molded stator and is painted with special anti-corrosion paint. The series of products can provide anti-corrosion products, and users can contact the company if they need them.

Application of Ed series electric hydraulic thrusters

Electric hydraulic thruster is a compact driving control device that integrates electric motors, centrifugal pumps, and oil cylinders. It is widely used as a driving device for various block brakes and disc brakes, and can also be used for driving control of various industrial valves, gates, directional swing and rotation (<900) devices, and clamping devices.