Tongyang brand industrial centrifugal dehydrator with guide cloth frame, high-speed centrifuge

The Tongyang brand industrial centrifugal dewatering machine with guide cloth frame is a high-speed centrifuge, and the industrial centrifugal dewatering machine with guide cloth frame is selected from Tongjiang washing machinery. The so-called guide cloth frame industrial dewatering machine is an industrial dewatering machine that is installed in traditional industrial dewatering machines with guide cloth frames for importing warm cloth and exporting dry cloth. It is an industrial dewatering machine with large volume of cloth that needs to be dehydrated in various cloth making and textile factories. Due to the increasing market demand for this machine, in order to help users better understand it, today I will introduce the working principle of the guide cloth frame industrial dehydration machine.

The operation of the fabric guide frame industrial dehydrator can be divided into three steps: fabric introduction, drying, and fabric export. The specific principle is to pass the wet cloth through the fabric guide frame, activate the motor of the fabric guide frame, and play a role in pulling the fabric. At this point, the drum is in a low-speed forward running state, and the fallen cloth is evenly distributed on the drum wall until the capacity is filled. Then, the industrial dewatering machine starts and uses high-speed centrifugal force to separate the water. When the operation reaches the predetermined time, the industrial dewatering machine automatically slows down until the drum body is completely stopped, The post industrial dehydrator operates at low speed in reverse to transport the dehydrated fabric to the finished vehicle through a conical drum and a cloth dropping frame until the work is completed.

Industrial dewatering machine, also known as centrifuge, is a high-speed centrifugal drying machine, a three legged centrifuge with fast speed and high dehydration rate. It is generally suitable for centrifugal dehydration of linen, clothing, fabrics, sweaters, sweaters, socks, hats, scarves, towels, bathtowels, bed sheets, tablecloths, and tablecloths, The manufacturer directly produces and sells, without any other links, and directly offers wholesale sales.

Main features of industrial dehydrators

1: The industrial dehydrator has a unique three legged suspension structure, which can avoid vibration caused by imbalanced load;

2: The conversion tank of the industrial dehydrator is made of stainless steel plate, which is sturdy and durable;

3: The industrial dehydrator has a unique brake opening and closing arm device, which has good braking performance and is safe and reliable;

4: The industrial dehydrator adopts a triangular tape drive, which is driven by a motor to start the starting wheel and slowly start to normal speed, ensuring smooth and vibration free operation.

5: The models of industrial dehydrators include: ф 500 dewatering machine, ф 600 dehydrator, ф 800 dehydrator, ф 1000 dewatering machine, ф 1200 dewatering machine and other specifications.

Working Principle of Industrial Dehydrator

The dehydrator operates on the principle of centrifugal motion, which is driven by an electric motor to rotate the inner liner at high speed. The water in the stripped object undergoes centrifugal motion at high speed, and water splashes out of the inner liner from the surrounding eyes, achieving the purpose of dehydration.

This dehydrator is a three legged suspension type, which can avoid foot vibration during operation due to imbalanced load inside the drum.

The shell and top cover are made of steel plates, the chassis material is cast iron, the outlet pipe is below the chassis, and the base and column base materials are all cast iron.

The main shaft is made of high-quality steel, equipped with two bearings, and the lower end is supported by thrust ball bearings to reduce wear and save power.

The drum is made of copper or stainless steel button holes, and the cage base is made of cast iron and lined with a stainless steel bottom cover. The drum is installed on the conical surface at the upper end of the spindle to ensure smooth operation.

This dehydrator adopts an independent electric motor driven by triangular tape, equipped with a centrifugal starting flange, which can slowly start the machine. Its braking efficiency is high, which can quickly stop the drum and avoid the main shaft from being twisted due to braking.

Operating methods for industrial dehydrators

1. Load the items that need to be dehydrated evenly and smoothly into the drum, paying attention to stability and not overloading.

2. During operation, start the motor and after about 90 seconds, the machine reaches normal speed and the water outlet pipe begins to flow.

3. When the motor is started for 8-10 minutes and there is no water flowing out of the water pipe, the power can be cut off and the machine stops running.

4. Braking: Under normal circumstances, if the power is cut off for 1-2 minutes, intermittently pull the brake handle to stop the vehicle.

Precautions for using industrial dehydrators

1. The operator must be familiar with the structure, performance, and operating methods of the machine.

2. Before driving, rotate the drum several times to avoid uneven loading, overloading, and other malfunctions.

3. The feeding should be evenly distributed to avoid excessive vibration.

4. During normal operation, do not use the brake device to avoid damaging other parts of the Lanling belt.

5. Please do not place any items on the top cover to avoid accidents after driving.

6. If the starting lanling belt slips, it should be stopped immediately to check if there is any oil or lubricant on the tape. If there is, it should be washed and wiped clean before use. If the tape is worn, it should be replaced immediately to avoid wearing parts.

7. Conduct regular maintenance for six months and add new butter.