Overview
Product Details
| Product Type | Hall sSensor |
| Minimum magnetic induction range | -60mT to 60m |
| Typical value | -67mT to 67mT |
| Minimum output voltage | 0.4vdc to (vs-0.4vdc) |
| Typical value | 0.2Vdc to (vs-0.2 Vdc) |
SS495A1 small proportional - hall sensor has a proportional output voltage, which is set by the power supply voltage.It varies in proportion to the strength of the magnetic field.The new hall effect IC chip can provide better temperature stability and sensitivity.The film resistance on the chip is laser corrected to achieve high accuracy and temperature compensation to reduce zero and gain drift in the temperature range.The Quad Hall sensor minimizes the effect of mechanical and thermal stress on output.The positive temperature coefficient of sensitivity helps to compensate the negative temperature coefficient caused by economical magnets, thus achieving a robust and reliable design over a wide temperature range.
Advantage in
Size small
Low power consumption
Single current sink or - current source output
Built-in film resistance - laser correction ensures accurate sensitivity and temperature compensation
Rail to rail operation can provide more available signals to ensure higher accuracy
Both positive and negative flux densities are responsive
The Quad Hall sensor ensures stable output
The product application
Current induction
Motor control
Position sensing
Magnetic coded reading
Rotary encoder
Ferromagnetic metal detector
Vibration sensor
Liquid level sensor
Weight sensing
The performance parameters
Product type hall effect digital position sensor IC
Package type radial lead IC
Power supply voltage 4.5Vdc to 10.5Vdc
Output type sink/source
Terminal type printed circuit board
The type of magnetic pole is -ly proportional
Operating temperature -40℃ to 150℃
The typical value of output voltage is 0.2Vdc, and the minimum value is 0.4Vdc±0.6Vdc
-ity (range percentage) -1.0%
Temperature error ±0.04%(zero drift), min. -0.01, Max. 0.05 (sensitivity)
The power supply current at 5Vdc is 8.7mA
Minimum output current 1mA;A typical 1.5 mA
The sensitivity of 3.125 mV + / - 0.094 mV/G
Response time is 3us
Series name SS490
1. Is it your product new and original?
Of course, our products could accept any testing, If there any quality questions, we will take responsible.
2. What is your Warranty?
Within 90days after package have been received.
3. Quality Problems
If got any questions, we can offer technical support or return service.
4. What is your leadtime?
There is not leadtimes for instock product, Most of the part could be ship out within 3days after comfirmation of the payment.
