Overview
| brand | festo | producing area | China |
| material quality | aluminium alloy | type | Pneumatic components |
| size | See instructions | Processing customization | yes |
| Applicable scope | mechanical equipment | model | DPZ-25-16 |
| weight | 1.0kg | Pipe Size | G1/8 |
| Pige Tread | Internal thread | type | Dual axis cylinder |
| Cylinder diameter | 25mm | Standard Travel | 16mm |
| series | DPZ | ||
Product Details
Regarding after-sales service:
Regarding logistics:
Use and installation of Festo DPZ and DPZJ dual axis guide rod cylinders (dual piston cylinders):
1. When there is a change in load during work, cylinders with sufficient output force should be selected;
2. Under high temperature or corrosive conditions, corresponding high-temperature or corrosion-resistant cylinders should be selected;
3. In places with high humidity, high dust, or water droplets, oil dust, or welding slag, the cylinder should take necessary protective measures;
4. Before connecting the cylinder to the pipeline, dirt inside the pipeline must be prevented from entering the cylinder;
5. The medium used in the cylinder should pass through 40 μ Can only be used after filtering with filter elements above m;
6. In low-temperature environments, anti freezing measures should be taken to prevent the freezing of moisture in the system:
7. Before using the cylinder, it should undergo a no-load test run. Before running, adjust the buffer to gradually loosen it to avoid excessive impact and damage to the cylinder;
8. The cylinder should avoid lateral loads as much as possible during operation to maintain its normal operation and service life;
9. If the cylinder is removed and not used for a long time, attention should be paid to surface rust prevention, and dust blocking caps should be added to the intake and exhaust ports.