Qianglong Yihai QLY-1321 can grind round edges, straight edges, and duckbill edges of glass at a discounted price for irregular grinding and rounding

QLY-1321 type

The QLY-1321 glass irregular edge grinding machine is suitable for processing irregular edges and beveled edges of flat glass. It uses vacuum to adsorb glass onto suction cups, and is equipped with a motor to drive a five-star disc or an independent satellite disc on a separate drive disc to rotate, This machine can process irregular flat glass with a rotating diameter of 700-2100MM or 100-700MM. The rotation speed of the five-star disc can be adjusted at will during operation. This machine can also semi-automatically grind simple shaped irregular glass using a cylinder. When grinding the periphery, the grinding wheel can be replaced for coarse, fine grinding, and polishing. When grinding beveled edges, a bowl shaped grinding wheel can be installed to tilt the grinding head backwards, adjust the angle of the beveled surface, and machine and cut the end face.

Main technical parameters:

1. Glass rotation diameter: 100-2100MM`

2. Glass thickness: 3-30MM

3. Bevel angle: 0 ` -20`

4. Rotary table speed: 1-4R/MIN

5. Satellite turntable speed: (2-10R/MIN)

6. Beveled grinding wheel: ф 150 (bowl shaped)

7. Grinding wheel: ф one hundred ф 150 (preferred)

8. Voltage 3 boxes: 380V/50HZ

9. Return diameter of beveled glass: 400-2100MM

10. Maximum bevel width: 35MM

11. Total power: 3.2KW

12. Weight: 1000kg

13. Overall dimensions: 1200 * 1200 * 1800mm

QLM-1320 glass inner and outer circles

Glass inner and outer circular edge grinding machine is suitable for processing ф 120~ ф 800mm glass inner circle and ф 700mm~ ф 1800 cylindrical warehouse workers, the outer circle can also be ground into flat edges, round edges, duckbill edges, etc; This machine uses vacuum to adsorb glass onto the suction cup, equipped with a stepless speed control motor, and drives the rotary table to rotate. The speed can be adjusted at any time during working hours, with smooth speed regulation. The machine can also use a cylinder to push the rotating arm for semi-automatic grinding. When grinding glass of different thicknesses first, the grinding head can use its cylinder to quickly lift and lower, in order to quickly change the position of the grinding wheel or replace the grinding wheel. Replacing the grinding wheel can be done separately for rough grinding, fine grinding, and polishing.

External dimensions: length 1300X width 1700X height 2100mm

Processed glass thickness: 3-21mm

Weight: 1000KG

Voltage: 380V, 50HZ

Machined glass inner circle diameter: 150 mm-800 mm

Rotary table speed: 2-6r/min, using stepless speed regulation

Power: 3kw