Waste plastic recycling and granulation equipment manufacturer PVC plastic pipe air-cooled hot cut granulation production line

1、 Equipment Introduction:

Waste plastic recycling and granulation equipment manufacturer PVC plastic pipe air-cooled hot cut granulation production line - Aisman Machinery 

Jiangsu Aisman Machinery ACE-SJZ Series Conical Twin Screw Air Cooled Hot Cut GranulatorMainly used for hot cutting granulation and extrusion of PVC+CaCo calcium carbonate and other powder plastics into particles. It has the characteristics of low shear rate, uniform plasticization and mixing, high yield, and stable quality. The ACE-SJZ conical twin screw adopts a new high torque reducer to reduce energy consumption and increase equipment output. The production line is safe and convenient, and the machine barrel adopts a cast aluminum heating ring heating and air cooling system. The machine barrel heating adopts automatic temperature control, There are two types of screw cores: water-cooled and oil-cooled. The motor adopts AC or DC motor, equipped with a granulator head, a cutting device, a water circulation system, and an air conveying device.

      The Aisman Mechanical PVC hot cutting and granulation production line consists of a screw extrusion plasticizing system, a transmission system, a heating and air cooling system, and a granulation system.

     oneThe extrusion and plasticization system of PVC hot cutting granulator includes screws, barrels, hoppers, heads, and molds. Plastic is plasticized into a uniform melt through the extrusion system, and is continuously extruded by the screw head under the established pressure during this process.

     twoThe function of the gearbox transmission system is to drive the screw and supply the torque and speed required by the screw during the extrusion process, usually composed of an electric motor, reducer, and bearings.

     threeHeating and air cooling are the conditions that can be carried out during the plastic extrusion process.