Overview
| brand | Trimble/Tianbao | model | R12 |
| Packaging/Specifications | Module Type | ||
| Frequency band | Number of frequency bands | ||
| GNSS type | FLASH capacity | ||
| Supply voltage range | Typical supply voltage | ||
| USIM card interface | SMS | ||
| voice call | Real time clock | ||
| size | weight | ||
| working temperature | authentication | ||
| packing | Minimum packaging quantity | ||
| quantity | one hundred | GPS positioning accuracy | Horizontal 3mm+0.1ppmR |
| producing area | United States | Map function | have |
| Battery type | lithium battery | Waterproof function | IP67 level |
| type | hand | Memory | 6GB |
Product Details
Performance specifications | ||
GNSS measurement | ||
Flexible tracking of any constellation signal through Trimble ProPoint GNSS technology and improved positioning performance in challenging environments 1 | ||
Precision fixed-point electronic bubble tilt compensation using Trimble SurePoint improves measurement efficiency and traceability | ||
Advanced Trimble custom measurement GNSS chip with 672 channels | ||
Trimble xFill technology can reduce downtime caused by radio signal interruption | ||
Signal synchronization with | GPS: L1C, L1C/A, L2C, L2E, L5 GLONASS: L1C/A, L1P, L2C/A, L2P, L3 SBAS (WAAS, EGNOS, GAGAN, MSAS): L1C/A, L5 Galileo: E1, E5A, E5B, E5 AltBOC, E62 Beidou: B1, B1C, B2, B2A, B3 QZSS: L1C/A, L1-SAIF, L1C, L2C, L5, LEX NavIC (IRNSS): L5 L-segment: CenterPoint RTX | |
Iridium filtering above 1616MHz, with an antenna 20 meters away from the iridium transmitter | ||
Japanese LTE filtering below 1510MHz, with antennas up to 100 meters away from the Japanese LTE cell tower | ||
Digital Signal Processor (DSP) technology for detecting and recovering forged GNSS signals | ||
Receiver Autonomous Integrity Monitoring (RAIM) algorithm for detecting and rejecting problematic satellite measurement data to improve position quality | ||
Improved protection for incorrect ephemeris data | ||
Positioning rate | 1 Hz, 2 Hz, 5 Hz, 10 Hz, and 20 Hz | |
Positioning specifications | ||
Code differential GNSS localization | ||
level | 0.25 m+1 ppm RMS | |
vertical | 0.50 m+1 ppm RMS | |
SBAS | Generally<5 m 3DRMS | |
Static GNSS measurement | ||
High precision static | ||
level | 3 mm+0.1 ppm RMS | |
vertical | 3.5 mm+0.4 ppm RMS | |
Static and Fast Static | ||
level | 3 mm+0.5 ppm RMS | |
vertical | 5 mm+0.5 ppm RMS | |
Real time dynamic measurement | ||
Single baseline<30 km | ||
level | 8 mm+0.5 ppm RMS | |
vertical | 15 mm+0.5 ppm RMS | |
RTK start time (for specified accuracy) | 6 2-8 seconds | |
TRIMBLE RTX? Technology (Satellite and Cellular/Internet (IP)) | ||
CenterPoint RTX | ||
level | 2 cm RMS | |
vertical | 5 cm RMS | |
RTK convergence time (for specified accuracy) - worldwide<15 minutes | <15 minutes | |
RTK QuickStart convergence time (for specified accuracy)<1 minute | <1 minute | |
RTK convergence time for specified accuracy in selected region - (Trimble RTX fast region) | <1 minute | |
TRIMBLE XFILL | ||
level | RTK9+10 mm/min RMS | |
vertical | RTK9+20 mm/min RMS | |
hardware | ||
physical property | ||
| Size (W × H) | 11.9 cm x 13.6 cm | |
| weight | 1.12 kg, including built-in battery and built-in radio with ultra-high frequency antenna 3.95 kg, including all the above items, plus centering lever, Trimble TSC7 controller and bracket | |
| temperature | work | -40 ° C to+65 ° C |
deposit | -40 ° C to+75 ° C | |
humidity | 100%, condensation | |
Protection level | IP67 dustproof, temporarily submerged in water for 1 meter without damage | |
Shock and vibration (tested to meet the following environmental standards) | ||
Impact | When not working: Falling from a 2-meter-high measuring rod onto a cement floor without damage During operation: Passed 40G, 10 millisecond sawtooth wave impact test | |
vibration | MIL-STD-810F, FIG.514.5C-1 | |
Electrical performance | ||
Power supply: 11 to 24 volt DC external power supply, port 1 and port 2 with overvoltage protection (Lemo 7-pin) | ||
Rechargeable and detachable 7.4V-3.7Ah intelligent lithium battery with LED status indicator | ||
In RTK mobile station mode, the power consumption with built-in radio is 4.2 W | ||
Built-in battery working time | ||
450 MHz receive only option | 6.5 hours | |
450 MHz receive/transmit option (0.5 W) | 6.0 hours | |
450 MHz receive/transmit option (2.0 W) | 5.5 hours | |
Cellular mobile reception options | 6.5 hours | |
Communication and data storage | ||
Serial port | 3-wire serial port (Lemo 7-pin) | |
| USB v2.0 | Supports data download and high-speed communication | |
| Radio modem | Fully integrated and sealed 450 MHz broadband receiver/transmitter in the frequency range of 403 MHz to 473 MHz, supporting Trimble, Pacific Crest, and SATEL radio protocol: | |
Transmitting power | 2 W | |
range | Generally 3-5km/10km | |
| Cellular mobility | Integrated 3.5G modem, HSDPA 7.2 Mbps (download), GPRS multi slot 12 class, EDGE multi slot 12 class, Penta band UMTS/ HSDPA (WCDMA/FDD) 800/850/900/1900/2100 MHz, Quad-band EGSM 850/900/1800/1900 MHz GSM CSD, 3GPP LT | |
Bluetooth | Fully integrated fully sealed 2.4GHz communication port (Bluetooth) | |
Wi Fi | 802.11 b, g, access point and client mode, WPA/WPA2/WEP64/WEP128 encryption | |
Input/output ports | Serial port, USB, TCP/IP, IBSS/NTRIP, Bluetooth | |
data storage | 6 GB memory | |
data format | CMR+, CMRx, RTCM2.1, RTCM2.3, RTCM3.0, RTCM3.1, RTCM3.2 inputs and outputs 24NMEA output, GSOF, RT17, and RT27 output, 1PPS output | |
WEBUI | ||
Provide simple configuration, operation, status, and data transmission | ||
Accessible through Wi Fi, serial port, USB, and Bluetooth | ||
Supported controllers and field software | ||
Trimble TSC7, Trimble T10, Trimble T7, Android, and iOS devices running supported apps | ||
Trimble Access 2019.10 or later | ||