Manufacturer of 1L-100L double layer extraction glass reactor

Spot manufacturer of double layer glass reaction kettle supporting water bath potProduct Introduction

The product can be paid with a circulating water type multi-purpose vacuum pump, diphragm vacuum pump, low temperature circulation (vacuum) pump, circulating cooler, constant temperature circulator, low temperature coolant circulation pump, sealed reflection heating circulation device, Etc. to form a system device The inner container of the double layer glass reaction kettle is used to place reaction materials, which can be vacuumed and stirred with speed regulation The interlayer can introduce frozen liquid, water, and high temperature liquid to heat and cool the materials used in experiments, pilot tests, and production of new materials for chemistry, fine chemicals, And biopharmaceuticals

Spot manufacturer of double layer glass reaction kettle supporting water bath potUsage:

(1) Check if the power supply voltage matches the specifications provided on the machine nameplate

(2) Plug in the power plug, turn on the power switch on the frequency converter, and use the speed control knob to select the appropriate speed

(3) The flow of materials may reconcile with the power of the motor speed at a certain point Please change the motor speed to avoid situation

(4) After installing the mixing rod, it must be rotated by hand to check for good concentration If the concentration is not good, loose the heavy clamp, clamp it correctly, and then turn on the power supply, gradually adjusting it from slow to fast

(5) By using a still rod adjuster, the still leaves can be adjusted up and down 5cm as needed

(6) If you find a decrease in the sealing performance of the kite, please check the rotating bearings inside the mixer sleep

(7) Please confirm the accurate glass material for self required reaction bottoms and other glass instruments to ensure safe use

(8) The interlayer on the glass bottom is externally connected to a circulation port, which can be heated with hot oil for reaction, and cooled with coolant for low temperature reaction If steam heating is used, it should not exceed 0.5K-1K

(9) When conducting tests at low temperatures, the bottom discharge valve will frost When using the valve, be sure to partially think it first to prevent it from crashing the glass

(10) If there are specific objects in the solution during use, there may be residual on the PTFE piston of the valve during discharge, which may affect the air tightness during reuse It is important to clean and reuse the solution after each discharge

Technical parameters of double layer glass reaction bucket: ★ Optional exploration proof motor (All exploration proof motors have exploration proof certificate) 5L/110L/20L/30L50L/100L has been formed