Fume hood

Shenzhen Century Vision Electronic Equipment Co., Ltd. specializes in selling and leasing laboratory instruments, such as industrial CT scanner, X-ray detector, metallographic microscope, ultrasonic microscope, Scanning electron microscope (tungsten filament electron microscope, field emission electron microscope, lens electron microscope), FIB cluster ion beam, XPS X-ray photoelectron spectrometer, AES Auger electron spectroscopy, FTIR spectrum, Fourier infrared spectrometer, TOS-SIMS Secondary ion mass spectrometry AFM Atomic force microscopy, etc., our company will serve you with the best service and price!

1. Cabinet: The all-steel integrated cabinet is made of 1.2mm thick high-quality cold-rolled steel plate, which has undergone acid pickling, phosphating, and anti-corrosion treatment. The surface is treated with EPOXY epoxy resin powder electrostatic spraying to prevent acid, alkali, and rust.

2. Deflector plate: Made of gray double resistant plate (Weishengya), 6mm thick, with a three-stage structure, effectively discharging gases of different specific gravity.

3. Operation table: Solid core physicochemical board (Weishengya) with a thickness of 12.7mm is used, which is corrosion-resistant, waterproof, and high-temperature (140 ℃) resistant. The surrounding area is thickened to prevent water from dripping into the cabinet, making it easy to clean and maintain. PP/stainless steel/epoxy resin/ceramic countertops can be selected as needed to meet the needs of different applications.

4. Backboard: Made of gray double resistant board (Weishengya), 6mm thick.

5. Top plate: Made of gray double resistant plate (Weishengya) with a thickness of 6mm, and its structure has a pressure relief effect on explosions.

6. Window: It adopts a 5mm thick safety explosion-proof glass with a balance combination, and the balance part is designed with an endless structure. The glass operated door is designed with left and right push pull, up and down opening, flexible operating procedures, and can safely complete special experiments.

7. Lighting: one 40W explosion-proof fluorescent lamp is hidden on the roof (the illumination is not less than 300LX), which is not in contact with the air flow in the Fume hood and is easy to replace, and the soft connection on the top has the function of decompression and release for explosion.

8. Instrument panel: Adopting touch button microelectronic control panel, protection device, power supply, motor, socket, lighting, leakage, overload, short circuit and other fault protection.

9. Accessories: Equipped with water and PP small water cups, remote control water valves and nozzles can also be selected; At the same time, remote control valves and nozzles can be configured as needed.

10. Exhaust system: The fan adopts domestic corrosion-resistant PP fan according to actual usage requirements, with a noise level of less than 65dBA; The on-site situation of the air duct uses PP air duct, which is directly discharged outside the wall or to the location.

11. Specification: The overall dimensions of the fan cabinet are: width: 1200mm, 1500mm, 1800mm; Depth: 850mm; Height: 2350mm; The internal usable depth must be ≥ 650mm in order to accommodate larger instruments.