Overview
| brand | Kolut | weight | 350kg |
| source | 380V | temperature range | 20-60 ℃ |
| measuring range | 20-60 ℃ | Processing customization | yes |
| Sterilization method | high temperature | material quality | Stainless steel |
| Number of cabins | 6 | model | KLT-V/6-200 |
| Humidity deviation | ≤ ± 1% RH | Temperature uniformity | ≤ ± 1 ℃ |
| Humidity uniformity | ≤ ± 1% RH | Temperature fluctuation | ≤ ± 0.5 ℃ |
| Air exchange rate | 0.2-1.5 times/hour | ||
Product Details
Providing a separate experimental space can eliminate mutual contamination of formaldehyde released by formaldehyde test specimens, which affects the test results and greatly improves the accuracy of the experiment. The configuration of multiple compartments allows for cyclic testing, greatly improving testing efficiency. This equipment is specially produced for the 15 day pre-treatment requirements of plate samples in the GB18580-2017 and GB17657-2013-4.60 standards. It has multiple environmental compartments for one equipment, and this model can achieve pre-treatment of 4/6/8 standard sample samples without cross contamination. Avoid the problem of mutual interference caused by simultaneous pre-treatment of different samples. It can effectively improve the efficiency of sample testing and evaluation in inspection institutions. The test pieces shall be placed at 23 ± 1 ℃ and a relative humidity of (50 ± 5)% for (15 ± 2) days, with a distance of at least 25mm between the test pieces, allowing air to circulate freely on all surfaces of the test pieces. The indoor air replacement rate shall be at least once per hour at constant temperature and humidity, and the mass concentration of formaldehyde in the indoor air shall not exceed 0.10mg/m3
Executive standard for VOC preprocessing cabin using multi cabin method
GB18580-2017 "Indoor Decoration and Decoration Materials - Formaldehyde Emission Limits in Artificial Panels and Their Products"
GB17657-2013 "Experimental Methods for Physical and Chemical Properties of Artificial Panels and Decorative Artificial Panels"
EN 717-1 "Measurement of formaldehyde emissions from wood-based panels - Environmental chamber method"
ASTM D6007-02 "Standard Test Method for Determination of Formaldehyde Concentration in Gases Released from Wood Products in a Small Scale Environmental Chamber"
